金琳.基于ARIZ的折页机挡规降噪创新方案设计[J].包装工程,2023,44(19):196-204.
JIN Lin.Design of Innovative Scheme for Noise Reduction of Folding Machine Baffle Gauge Based on ARIZ[J].Packaging Engineering,2023,44(19):196-204. |
| 基于ARIZ的折页机挡规降噪创新方案设计 |
| Design of Innovative Scheme for Noise Reduction of Folding Machine Baffle Gauge Based on ARIZ |
| 投稿时间：2023-02-03 |
| DOI：10.19554/j.cnki.1001-3563.2023.19.025 |
| 中文关键词: 折页机 降噪 创新设计 ARIZ |
| 英文关键词: folding machine noise reduction innovative scheme ARIZ |
| 基金项目:国家新闻出版署“智能与绿色柔版印刷重点实验室”招标课题(ZBKT202204，KLIGFP-01) |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 对栅栏式折页机的挡规进行改进设计，降低工作时的噪声，减轻噪声导致的职业病危害，同时设计一种新的降噪方法。方法 首先对折页机工作噪声问题进行初步分析;然后选取噪声最大的挡规部位，根据ARIZ解决问题流程，进行问题分析和建立问题模型，并分析问题模型，挖掘出降噪问题的创新解;最后对创新解从成本、可操作性、可用性方面进行评估。结果 根据ARIZ解决问题流程得到了3种挡规降噪优秀改进方案，并选择出了1种挡规降噪最优解决方案。结论 采用方形挡块和圆形毛刷轮组合挡纸的设计方案是挡规降噪改进的较佳方案，同时也证明ARIZ创新方法可以有效地应用于降噪设计中，为折页机的降噪设计提供理论依据。 |
| 英文摘要: |
| The work aims to improve the design of baffle gauge of buckle folding machine to reduce the noise and the occupational hazards during work, and design a new noise reduction method. Firstly, the source of the working noise of the folding machine was analyzed. Secondly, the noisiest part was selected to analyze the problem and establish the problem model, and analyze the problem model to dig out the innovative solution according to ARIZ problem solving process. Finally, the innovative solution was evaluated from the aspects of cost, operability and availability. According to the ARIZ problem solving process, three kinds of excellent improvement schemes and an optimal solution for the noise reduction of the baffle gauge were obtained. The combination of square block and circular brush wheel is a better scheme to improve the noise reduction of the baffle gauge. It also proves that ARIZ innovative method can be effectively applied in noise reduction design, which provides a theoretical basis for the noise reduction design of folding machine. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号