文章摘要
孙德强,葛凤,张超,崔燕燕,本金翠,常露,高璐璐,王倩.正方形自填充蜂窝结构异面平台应力的研究[J].包装工程,2023,44(17):269-275.
SUN De-qiang,GE Feng,ZHANG Chao,CUI Yan-yan,BEN Jin-cui,CHANG Lu,GAO Lu-lu,WANG Qian.Out-of-plane Plateau Stress of Square Self-filled Honeycomb Structure[J].Packaging Engineering,2023,44(17):269-275.
正方形自填充蜂窝结构异面平台应力的研究
Out-of-plane Plateau Stress of Square Self-filled Honeycomb Structure
投稿时间:2022-11-17  
DOI:10.19554/j.cnki.1001-3563.2023.17.033
中文关键词: 正方形自填充蜂窝  异面冲击  有限元模拟  平台应力
英文关键词: square self-filled honeycomb  out-of-plane impact  finite element simulation  plateau stress
基金项目:国家自然科学基金(51575327);国家级一流专业建设项目(包装工程2022)
作者单位
孙德强 陕西科技大学 中国轻工业功能印刷与运输包装重点实验室 轻化工程国家级实验教学示范中心 c.3S包装新科技研究所西安 710021 
葛凤 陕西科技大学 中国轻工业功能印刷与运输包装重点实验室 轻化工程国家级实验教学示范中心 c.3S包装新科技研究所西安 710021 
张超 西安西电变压器有限责任公司西安 710077 
崔燕燕 陕西科技大学 中国轻工业功能印刷与运输包装重点实验室 轻化工程国家级实验教学示范中心 c.3S包装新科技研究所西安 710021 
本金翠 陕西科技大学 中国轻工业功能印刷与运输包装重点实验室 轻化工程国家级实验教学示范中心 c.3S包装新科技研究所西安 710021 
常露 陕西科技大学 中国轻工业功能印刷与运输包装重点实验室 轻化工程国家级实验教学示范中心 c.3S包装新科技研究所西安 710021 
高璐璐 陕西科技大学 中国轻工业功能印刷与运输包装重点实验室 轻化工程国家级实验教学示范中心 c.3S包装新科技研究所西安 710021 
王倩 陕西科技大学 中国轻工业功能印刷与运输包装重点实验室 轻化工程国家级实验教学示范中心 c.3S包装新科技研究所西安 710021 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了促进正方形自填充蜂窝的合理使用,研究其异面平台应力随冲击速度、壁厚边长比和自填充级数的变化规律。方法 利用ANSYS/LS-DYNA建立基于胞元阵列的正方形自填充蜂窝异面冲击分析的有限元模型。对自填充级数为0的正方形蜂窝进行异面压缩试验和相应的仿真分析,证明有限元模型的可靠性。基于简化的超折叠单元理论,建立蜂窝准静态平台应力的理论模型,并证明理论模型的可靠性。结果 正方形自填充蜂窝在大的壁厚边长比和冲击速度下拥有更高的动态平台应力;在自填充级数由0变为1时,动态平台应力增长率最大。结论 在其他因素不变的情况下,正方形自填充蜂窝的异面动态平台应力与冲击速度的平方呈线性关系,与壁厚边长比呈幂指函数关系,其增长率随自填充级数逐级递减。基于数值模拟结果,得到了不同自填充级数下正方形自填充蜂窝异面动态平台应力的经验公式。
英文摘要:
      The work aims to promote the rational use of square self-filled honeycombs by studying the change rules of their out-of-plane plateau stresses with impact velocity, ratio of cell wall thickness to side length and self-filling order. ANSYS/LS-DYNA was used to establish the finite element model based on cells array for the out-of-plane impact analysis of square self-filled honeycombs. The out-of-plane compression test and corresponding simulation analysis were carried out on the square honeycomb with self-filling order of 0 to prove the reliability of the finite element model. Based on the simplified super folded element theory, the theoretical quasi-static plateau stress model of square self-filled honeycomb was established and verified by the simulation results. The square self-filled honeycomb higher dynamic plateau stress with increasing ratio of cell wall thickness to side length and impact velocity. When the self-filling order changed from 0 to 1, the growth rate of the dynamic plateau stress was the largest. When other factors are fixed, the out-of-plane dynamic plateau stress of square self-filled honeycomb has a linear relation with the square of velocity and a power function relation with the ratio of cell wall thickness to side length, and the growth rate decreases gradually with increasing self-filling order. Based on the finite element simulation, the empirical formulas of dynamic plateau stress are obtained for the square self-filled honeycomb with different self-filling orders.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21484723位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号