文章摘要
李子赫,刘穗君,刘颖,刘磊,李少华,柳宾,尹鑫,沈小燕,胡佳成.基于K-近邻算法的物料含水率测量标准装置设计[J].包装工程,2023,44(15):194-201.
LI Zi-he,LIU Sui-jun,LIU Ying,LIU Lei,LI Shao-hua,LIU Bin,YIN Xin,SHEN Xiao-yan,HU Jia-cheng.Standard Device Design for Matter Moisture Content Measurement Based on KNN Algorithm[J].Packaging Engineering,2023,44(15):194-201.
基于K-近邻算法的物料含水率测量标准装置设计
Standard Device Design for Matter Moisture Content Measurement Based on KNN Algorithm
  
DOI:10.19554/j.cnki.1001-3563.2023.15.025
中文关键词: 含水率测量  K-近邻算法  装置设计  烘箱法  水分分析仪  误差修正
英文关键词: moisture content measurement  K-nearest neighbor algorithm (KNN)  device design  oven method  moisture analyzer  error correction
基金项目:国家自然科学基金(61673358);河南中烟工业有限责任公司重点项目(A202053)
作者单位
李子赫 中国计量大学 计量测试工程学院杭州 310018 
刘穗君 河南中烟工业有限责任公司 南阳卷烟厂河南 南阳 473007 
刘颖 河南中烟工业有限责任公司 南阳卷烟厂河南 南阳 473007 
刘磊 河南中烟工业有限责任公司 南阳卷烟厂河南 南阳 473007 
李少华 河南中烟工业有限责任公司 南阳卷烟厂河南 南阳 473007 
柳宾 河南中烟工业有限责任公司 南阳卷烟厂河南 南阳 473007 
尹鑫 河南中烟工业有限责任公司 南阳卷烟厂河南 南阳 473007 
沈小燕 中国计量大学 计量测试工程学院杭州 310018 
胡佳成 中国计量大学 计量测试工程学院杭州 310018 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 针对烘箱法耗时长且不适用于生产现场的问题,围绕短时干燥法设计物料含水率测量标准装置。方法 装置主要包括移动底盘、箱体、水分分析仪、可充电电源、配电板、工业触屏电脑以及上位机软件。建立基于K-近邻(K-Nearest Neighbor)算法的物料含水率预测模型,并通过实验获得预测结果与烘箱法测量结果之间的修正关系。以抽取自卷烟厂的烟草样品为例,对装置进行测量实验。结果 当设置测量时间为30 min时,含水率测量结果的扩展不确定度低于0.5%。结论 该装置可代替烘箱法对物料含水率进行监控,也可以用于在线水分仪的原位校准。
英文摘要:
      The work aims to design a standard device for matter moisture content measurement based on the short time drying method, in order to solve the problems of poor timeliness and improper installation of standard oven on production site. The device was mainly composed of a mobile chassis, a box, a moisture analyzer, a rechargeable battery, a power distribution board, an industrial touch screen computer and PC software. The prediction model of matter moisture content based on K-nearest neighbor (KNN) algorithm was established, and the correction relationship between the prediction results and the measurement results of standard oven method was obtained. The measurement experiment was carried out to the device with tobacco samples provided by the cigarette factory. When the measurement time was 30 min, the expanded uncertainty of the moisture content measurement result by the device was no more than 0.5%. This device can replace the oven method to monitor the moisture content of matters, and can also be used for the in-situ calibration of online moisture analyzer.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21476734位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号