文章摘要
寇金宝,龚国腾,邢炯,杨传民.基于PIV的大豆蛋白液双枪喷涂速度场的研究[J].包装工程,2023,44(15):131-136.
KOU Jin-bao,GONG Guo-teng,XING Jiong,YANG Chuan-min.Double-nozzle Spraying Velocity Field of Soybean Protein Liquid Based on PIV[J].Packaging Engineering,2023,44(15):131-136.
基于PIV的大豆蛋白液双枪喷涂速度场的研究
Double-nozzle Spraying Velocity Field of Soybean Protein Liquid Based on PIV
  
DOI:10.19554/j.cnki.1001-3563.2023.15.017
中文关键词: 大豆蛋白液  双枪喷涂干涉  粒子图像速度场仪  速度场
英文关键词: soybean protein liquid  double-nozzle spraying interference  particle image velocimetry  velocity field
基金项目:天津市自然科学基金重点项目(15JCZDJC34100)
作者单位
寇金宝 天津商业大学天津 300134 
龚国腾 天津商业大学天津 300134 
邢炯 天津商业大学天津 300134 
杨传民 天津商业大学天津 300134 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了在保证喷涂雾化表征均匀性的前提下实现宽幅覆膜,提高覆膜的效率,以期得到均匀一致的大豆蛋白覆膜。方法 利用粒子图像速度场仪(Particle Image Velocimetry,PIV),对不同干涉程度下的大豆蛋白液双枪喷涂雾化场进行拍摄,利用PIV和Origin软件处理图像,得到速度数据并对比。结果 随着双枪间偏转角的增大,基线上的平均速度减小;偏转角为0°时,两喷雾粒子流在干涉线处碰撞,少有透过干涉线的粒子;在不同偏转角下,基线上的速度峰值从大到小为偏转角7°时的速度峰值、偏转角0°时的速度峰值、偏转角15°时的速度峰值;当偏转角为0°时,随着液压的增大,基线上的第2个速度谷值会右移,并且会增大直至消去。结论 当偏转角为0°、液压为0.24 MPa时,在基线上干涉区域内的速度最均匀。
英文摘要:
      The work aims to achieve wide coating on the premise of ensuring the uniformity of spray atomization characterization, improve the efficiency of coating, and get uniform and consistent coating of soybean protein. A Particle Image Velocimetry (PIV) was used to take pictures of the spraying atomization field of soybean protein liquid under different interference degrees between two spray nozzles. PIV and origin software were used to process the images, and the speed data were obtained and compared. With the increase of deflection angle between two nozzles, the average velocity at baseline decreased. When the deflection angle was 0°, two spray particles collided at the interference line, and few particles passed through the interference line. The velocity peak on the baseline appeared at different deflection angles of 7°, 0°, and 15°. When the deflection angle was 0°, with the increase of hydraulic pressure, the second velocity valley value on the baseline moved to the right and increased until it disappeared. When the deflection angle is 0° and the hydraulic pressure is 0.24 MPa, the velocity is the most uniform in the interference region at the baseline.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21513813位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号