文章摘要
巩桂芬,何兴娟,周健民,张美琦.某型号锂电池全纸化包装件跌落仿真分析[J].包装工程,2023,44(13):277-284.
GONG Gui-fen,HE Xing-juan,ZHOU Jian-min,ZHANG Mei-qi.Simulation Analysis on Fall of a Type of Lithium Battery Fully Paper-based Packaging Parts[J].Packaging Engineering,2023,44(13):277-284.
某型号锂电池全纸化包装件跌落仿真分析
Simulation Analysis on Fall of a Type of Lithium Battery Fully Paper-based Packaging Parts
  
DOI:10.19554/j.cnki.1001-3563.2023.13.033
中文关键词: 碳中和  锂电池  跌落仿真
英文关键词: carbon neutral  lithium battery  drop simulation
基金项目:国家自然科学基金(51575327);陕西省教育厅重点实验室及基地项目(16JS014);陕西省教育厅2014陕西本科高校专业综合改革试点子项目(陕教高[2014]16号)
作者单位
巩桂芬 陕西科技大学 陕西省造纸技术与特种纸品开发重点研究室 中国轻工业纸基功能材料重点实验室 轻化工程国家级实验教学示范中心西安 710021 
何兴娟 陕西科技大学 陕西省造纸技术与特种纸品开发重点研究室 中国轻工业纸基功能材料重点实验室 轻化工程国家级实验教学示范中心西安 710021 
周健民 陕西科技大学 陕西省造纸技术与特种纸品开发重点研究室 中国轻工业纸基功能材料重点实验室 轻化工程国家级实验教学示范中心西安 710021 
张美琦 陕西科技大学 陕西省造纸技术与特种纸品开发重点研究室 中国轻工业纸基功能材料重点实验室 轻化工程国家级实验教学示范中心西安 710021 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 验证锂离子电池全纸化运输包装件的防护性能。方法 依据锂离子电池的产品特性、流通环境以及包装防护等多方面要求,选用合适的纸质包装材料得到全纸化的包装方案,选用仿真分析软件对包装件进行跌落模拟,得到其应力、应变等相关数据。结果 由跌落仿真分析可知,最大应力出现在外壳上盖凸台位置,其应力值为346.06 MPa,超过外壳最大许用应力值(325 MPa),外壳发生破损。锂电池包装件跌落时,外壳等效应力值为1.211 MPa,仿真得到的应力值均未超过材料的许用应力,不会发生损坏。结论 该包装结构能够在运输过程中吸收大部分的冲击能量,能很好地保护内部产品不受损伤,具有良好的防护性能。
英文摘要:
      The work aims to verify the protective performance of fully paper-based transport packaging for lithium-ion batteries. Based on the product characteristics, circulation environment, packaging protection and other requirements of lithium-ion batteries, a suitable paper packaging material was selected to obtain an all-paper packaging solution, and simulation analysis software was used to simulate the drop of the packaging parts and obtain their stress and strain data. As a result of the drop simulation, the maximum stress was 346.06 MPa at the top cover tab, which exceeded the maximum permissible stress value of 325 MPa and caused damage to the case. When the lithium battery packaging dropped, the equivalent stress value of the case was 1.211 MPa. The simulated stress values did not exceed the permissible stress of the material and no damage occurred. The conclusion shows that the packaging structure can absorb most of the impact energy during transport. It can protect the internal product well from damage and has good protective properties.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21511692位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号