贾环,何邦贵,夏家良.冰花锤纹特殊印刷工艺及BOBST加装UV固化系统改造[J].包装工程,2021,42(23):225-231.
JIA Huan,HE Bang-gui,XIA Jia-liang.Special Printing Process of Ice Flower Hammer Pattern and Retrofit of BOBST with UV Curing System[J].Packaging Engineering,2021,42(23):225-231. |
| 冰花锤纹特殊印刷工艺及BOBST加装UV固化系统改造 |
| Special Printing Process of Ice Flower Hammer Pattern and Retrofit of BOBST with UV Curing System |
| 投稿时间：2021-04-15 |
| DOI：10.19554/j.cnki.1001-3563.2021.23.032 |
| 中文关键词: 冰花锤纹 工艺改进 改造设计 计算机辅助设计 |
| 英文关键词: ice flower hammer pattern technological improvement reform and design computer aided design |
| 基金项目:云南省科技计划(2018DC020) |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 改进冰花锤纹的印刷工艺，提高云龙烟标印刷效率，并为BOBST印刷设备加装UV固化系统。方法 基于计算机辅助设计和实验验证的思想，改造设计凹版印刷设备，并将改进结果与“胶印+丝印”工艺做对比分析。结果 得到了可用于生产的凹版印刷设备，确定冰花锤纹凹版印刷速度为130 m/min，将云龙烟标的印刷速度提高了约6倍。结论 成功解决了冰花锤纹印刷工序繁复、生产过程离散、生产效率低的问题，并开发出现有凹版印刷设备的发展潜力。 |
| 英文摘要: |
| The work aims to improve the printing process of ice flower hammer pattern, increase the printing efficiency of Yun-long cigarette label and install UV curing system for BOBST printing equipment. Based on the computer aided design and experimental verification, the gravure printing equipment was reformed and designed, and the improved results were compared with the offset printing + screen printing for analysis. The gravure printing equipment available for production was obtained and the printing speed of ice flower hammer pattern was determined to be 130 m/min, which increased the printing speed of Yun-long cigarette label by about 6 times. The problems such as complicated process, discrete production process and low production efficiency of ice flower hammer pattern printing are solved successfully, and the development potential of existing gravure printing equipment is explored. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号