文章摘要
齐婧,张晨,王凤康,邱烨,刘如岩,李莹莹,郭文萍.食品接触材料接触面积三维测量技术与人工测量方法对比[J].包装工程,2021,42(7):175-180.
QI Jing,ZHANG Chen,WANG Feng-kang,QIU Ye,LIU Ru-yan,LI Ying-ying,GUO Wen-ping.Comparative Study of Three-Dimensional Measurement Technology and Manual Measurement for Contact Area of Food Contact Materials[J].Packaging Engineering,2021,42(7):175-180.
食品接触材料接触面积三维测量技术与人工测量方法对比
Comparative Study of Three-Dimensional Measurement Technology and Manual Measurement for Contact Area of Food Contact Materials
投稿时间:2020-10-16  
DOI:10.19554/j.cnki.1001-3563.2021.07.023
中文关键词: 食品接触材料  表面积  三维测量技术  人工测量
英文关键词: food contact materials  surface area  three-dimensional measurement technology  manual measurement
基金项目:
作者单位
齐婧 中国肉类食品综合研究中心北京 100068 
张晨 中国肉类食品综合研究中心北京 100068 
王凤康 中国天辰工程有限公司天津 300400 
邱烨 中国海关科学技术研究中心北京 100026 
刘如岩 中国肉类食品综合研究中心北京 100068 
李莹莹 中国肉类食品综合研究中心北京 100068 
郭文萍 中国肉类食品综合研究中心北京 100068 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 分析三维测量技术在不规则食品接触材料表面积和容积的计算中,相较于常用人工测量方法的应用优势。方法 以7种常见的不规则食品接触材料为例,分别用三维测量技术和人工测量技术测量样品表面积,每个样品平行测定6次,对比2种方法测量结果的准确度和精密度。结果 三维测量技术结果准确度高,精密度为0.0134%~1.63%;人工测量结果的精密度为0.748%~3.04%,其稳定性明显低于三维测量技术。结论 人工测量技术存在测量方法不确定、测量偏差大和测量难度大等缺点;三维测量技术操作简单、结果稳定性高、适用性广,具有广泛的应用前景。
英文摘要:
      The purpose is to analyze and evaluate the application advantages of three-dimensional measurement technology in the calculation of surface area and volume of food contact materials compared with the commonly used manual measurement methods. The surface area of 7 kinds of common food contact materials are measured by three-dimensional measurement technology and manual measurement technology respectively. Each sample is measured six times in parallel, and the accuracy and precision of the two methods are compared. The result shows that the accuracy of three-dimensional measurement technology is better with precision between 0.0134%-1.63%. The precision of manual measurement results is between 0.748%-3.04%, which is significantly worse than the result of three-dimensional measurement technology. Manual measurement technology has the disadvantages of uncertainty of measurement method, large measurement deviation and difficult measurement. Three-dimensional measurement technology has advantages of simple operation, high stability and wide applicability, has a wide application prospect.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21277927位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号