文章摘要
廖雁兵,宋海燕,王立军,边继庆.基于Ansys的新型双层蜂巢板抗压性能研究及优化设计[J].包装工程,2021,42(7):113-119.
LIAO Yan-bing,SONG Hai-yan,WANG Li-jun,BIAN Ji-qing.Compressive Performance and Optimal Design of New Double-Layer Honeycomb Panel Based on Ansys[J].Packaging Engineering,2021,42(7):113-119.
基于Ansys的新型双层蜂巢板抗压性能研究及优化设计
Compressive Performance and Optimal Design of New Double-Layer Honeycomb Panel Based on Ansys
投稿时间:2020-09-05  
DOI:10.19554/j.cnki.1001-3563.2021.07.015
中文关键词: 塑料蜂巢板  Ansys  优化设计  多目标优化
英文关键词: plastic honeycomb board  Ansys  optimized design  multi-objective optimization
基金项目:天津市自然科学基金(17JCTPJC55800)
作者单位
廖雁兵 天津科技大学天津 300222 
宋海燕 天津科技大学天津 300222
中国轻工业食品包装材料与技术重点实验室天津 300222 
王立军 天津科技大学天津 300222 
边继庆 安丘天利源新型材料有限公司山东 安丘 262100 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 利用Ansys研究一种新型双层蜂巢板的结构特征来优化该蜂巢板的结构参数,提高其抗压性能。方法 对蜂巢板进行压力试验和模型验证,利用响应面结果分析蜂巢单元的单元高度、厚度,以及中间面板厚度与蜂巢板平压最大等效应力的关系,最后利用响应面优化对蜂巢板进行多目标优化。结果 蜂巢板的平压最大等效应力与蜂巢单元高度、壁厚、中间面板厚度都有很大的关系,优化后的蜂巢的质量由8.9979 g降至7.8215 g,下降了13.07%,而蜂巢板的最大应力基本无变化。结论 通过Ansys Workbench的多目标优化,在保证蜂巢板抗压性能的情况下,有效地降低了蜂巢板的质量,同时也证明了此类方案的有效性。
英文摘要:
      To use Ansys to study the structural characteristics of a new type of double-layer honeycomb panel to optimize the structural parameters of the honeycomb panel and improve its compressive performance. Pressure test and model verification were performed on the honeycomb panel. The response surface results were used to analyze the cell height and thickness of the honeycomb element, as well as the relationship between the thickness of the middle panel and the stiffness of the honeycomb panel. Finally, the response surface optimization was used to optimize the honeycomb panel with multiple objectives. The stiffness of the honeycomb panel has a great relationship with the height of the honeycomb element, the wall thickness, and the thickness of the middle panel. The quality of the optimized honeycomb is reduced from 8.9979 g to 7.8215 g, a decrease of 13.07%, while the stiffness of the honeycomb panel is basically unchanged. Through the multi-objective optimization of Ansys Workbench, while ensuring the rigidity of the honeycomb plate, the quality of the honeycomb plate is effectively reduced, and the effectiveness of this type of solution is also proved.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21276731位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号