黄红星,王仪明,武淑琴,王佳.基于霍尔效应的印刷机能耗检测方法研究[J].包装工程,2020,41(9):205-209.
HUANG Hong-xing,WANG Yi-ming,WU Shu-qin,WANG Jia.Energy Consumption Detection Method of Printing Press Based on Hall Effect[J].Packaging Engineering,2020,41(9):205-209. |
| 基于霍尔效应的印刷机能耗检测方法研究 |
| Energy Consumption Detection Method of Printing Press Based on Hall Effect |
| 投稿时间：2019-09-09 修订日期：2020-05-10 |
| DOI：10.19554/j.cnki.1001-3563.2020.09.031 |
| 中文关键词: 能耗模型 霍尔效应 检测电路 CAN |
| 英文关键词: energy consumption model Hall effect detection circuit CAN |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 采用霍尔元件法搭建印刷机群能耗数字化检测平台。方法 通过建立印刷机能耗指标模型框架体系，形成以总耗电量指标、均值类指标、耗电比例类指标等为主的印刷机耗电评价标准，完善能耗评价准则。采用灵敏度高、稳定性好的霍尔元件作为能耗检测元件，并分析霍尔效应、磁平衡式电流和电压霍尔传感器的检测电路。采用伏安法功率测量方式分别检测各负载电路的电流与电压，通过A/D转换模块实现检测数据数字化，并通过硬件控制核心对采集的数字信号进行运算、输出和显示，采用CAN总线实现硬件控制系统与上位机之间数字信息交互。结果 搭建了印刷机群能耗数字化检测系统平台，实现了外围设备与上位机间的数据交互，实现了印刷机群以数据为核心，通过能耗检测、能效分析、能源成本控制以及能源指标优化，提高了能源利用效率。结论 能耗检测的实现既能减少冗余电量损耗，又有利于监测电路稳定性，利用霍尔元件法实现印刷机群能耗检测的方法是可行的。 |
| 英文摘要: |
| The work aims to form a digital inspection system for the energy consumption of printing presses by the Hall element method. By establishing a framework system for the energy consumption index model of printing presses, a power consumption evaluation standard of printing presses was formed based on the total power consumption index, average value index, and power consumption ratio index, and the energy consumption evaluation criteria were improved. The Hall element with high sensitivity and good stability was used as the energy consumption detection element. The detection circuits of the Hall effect, magnetically balanced current and voltage Hall sensors were analyzed. The current and voltage of each load circuit were measured by voltammetry power measurement method and the detection data were digitized through the A/D conversion module. Then, the collected digital signals were calculated, output, and displayed through the hardware control core. The CAN bus was used to implement digital information exchange between the hardware control system and the upper computer. As a result, a digital energy consumption detection system platform for the printing press group was formed, which realized the data interaction between the peripheral equipment and the upper computer, and made the printing press group take data as the core. Through energy consumption detection, energy efficiency analysis, energy cost control, and energy index optimization, energy efficiency was improved. The realization of energy consumption detection can not only reduce the redundant power consumption, but also is conducive to monitoring the stability of the circuit. It is feasible to use the Hall element method to realize the energy consumption detection of the printing press group. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501716号