文章摘要
代久双,毛长勇,刘强,戴秋洪,邬晓飞,田政富,赵其林,赵媛媛.发射药塑料包装箱的阻燃性能研究[J].包装工程,2020,41(1):207-210.
DAI Jiu-shuang,MAO Chang-yong,LIU Qiang,DAI Qiu-hong,WU Xiao-fei,TIAN Zheng-fu,ZHAO Qi-lin,ZHAO Yuan-yuan.Flame Resistance of Plastic Box for Packaging of Gun Propellants[J].Packaging Engineering,2020,41(1):207-210.
发射药塑料包装箱的阻燃性能研究
Flame Resistance of Plastic Box for Packaging of Gun Propellants
投稿时间:2019-09-30  修订日期:2020-01-10
DOI:10.19554/j.cnki.1001-3563.2020.01.033
中文关键词: 包装  塑料箱  HDPE材料  阻燃  相容性
英文关键词: package  plastic box  HDPE material  flame resistance  compatibility
基金项目:基础产品创新计划火炸药科研专项
作者单位
代久双 1.泸州北方化学工业有限公司四川 泸州 646005 
毛长勇 1.泸州北方化学工业有限公司四川 泸州 646005 
刘强 1.泸州北方化学工业有限公司四川 泸州 646005 
戴秋洪 1.泸州北方化学工业有限公司四川 泸州 646005 
邬晓飞 1.泸州北方化学工业有限公司四川 泸州 646005 
田政富 1.泸州北方化学工业有限公司四川 泸州 646005 
赵其林 1.泸州北方化学工业有限公司四川 泸州 646005 
赵媛媛 2.中国五洲工程设计集团有限公司北京 100089 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为提高发射药塑料包装箱的阻燃性能,设计一种新型阻燃改性HDPE塑料箱。方法 利用燃烧和相容性实验研究了十溴二苯醚和三氧化二锑2种阻燃剂含量、比例对HDPE塑料阻燃性能和相容性的影响,并通过理论分析探讨了2种阻燃剂对HDPE塑料的阻燃机理。结果 实验结果表明,未经阻燃改性的HDPE塑料阻燃效果较差,随着阻燃剂含量的增加,阻燃性能得到提高,相容性变差。结论 阻燃剂中十溴二苯醚和三氧化二锑的质量比为2∶1时,阻燃效果最佳,阻燃剂含量(质量分数)低于11%时,可以满足相容性要求。
英文摘要:
      The paper aims to design a new type of flame-resistant HDPE plastic box to improve the flame resistance of plastic box for the packaging of gun propellants. The effects of the content and ratio of two kinds of flame retardants, decabromodiphenyl ether and antimony trioxide, on the flame resistance and compatibility of HDPE plastics were inves-tigated by combustion and compatibility tests and the flame resistance mechanisms of the two kinds of flame retardants on HDPE plastics were analyzed theoretically. The test results showed that the flame resistant effect of HDPE plastics without flame retardant modification was poor. With the increase of the content of flame retardant, the flame resistance was improved, and the compatibility was weakened. When the ratio between decabromodiphenyl ether and antimony trioxide is 2∶1, the flame resistance effect is the best; when the content of fire retardant is lower than 11%, the compatibility requirements can be satisfied.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21277333位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号