文章摘要
钟飞,黄振.基于遗传算法的电容装盘机器人轨迹规划[J].包装工程,2019,40(9):185-191.
ZHONG Fei,HUANG Zhen.Trajectory Planning of Capacitor Loading Robot Based on Genetic Algorithm[J].Packaging Engineering,2019,40(9):185-191.
基于遗传算法的电容装盘机器人轨迹规划
Trajectory Planning of Capacitor Loading Robot Based on Genetic Algorithm
投稿时间:2019-01-17  修订日期:2019-05-10
DOI:10.19554/j.cnki.1001-3563.2019.09.030
中文关键词: 电容装盘机器人  轨迹规划  时间最优  带罚函数遗传算法
英文关键词: capacitor loading robot  trajectory planning  optimal time  genetic algorithm with penalty function
基金项目:湖北省技术创新专项(重大项目)(2018AAA026)
作者单位
钟飞 湖北工业大学武汉 430068 
黄振 湖北工业大学武汉 430068 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了改变电容人工装盘方式,提高电容装盘自动化程度及效率,选用SCARA型机器人代替人工方式,并对其进行轨迹规划,避免运动冲击影响电容装盘稳定性以及精确性。方法 首先介绍SCARA机器人的结构和电容装盘过程,然后利用五次非均匀B样条曲线完成轨迹曲线的构造,最后提出带罚函数的遗传算法,以实现时间最优的机器人轨迹规划过程。结果 仿真结果表明,机器人装盘时间用时更短,且运动平稳无冲击,验证了算法的有效性。结论 该轨迹规划方法能够满足实际生产要求,提高了电容搬运装盘质量及效率。
英文摘要:
      The paper aims to change the mode of manual capacitor loading and improve the automation degree and efficiency of capacitor loading. SCARA robot was selected to replace the manual mode and carry out trajectory planning to avoid motion impact affecting the stability and accuracy of capacitor loading. The structure of SCARA robot and the process of capacitor loading were introduced, and then the trajectory curve was constructed with five non-uniform b-spline curves. Finally, a genetic algorithm with penalty function was proposed to realize the trajectory planning process of robots with optimal time. The simulation results showed that the robot loading was shorter and the motion was smooth without impact, which verified the effectiveness of the algorithm. The trajectory planning method can meet the actual production requirements and improve the quality and efficiency of capacitor handing and loading.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20791200位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号