文章摘要
崔爽,徐绍虎.一种礼盒包装结构设计[J].包装工程,2019,40(5):144-148.
CUI Shuang,XU Shao-hu.Packaging Structural Design of a Gift Box.Packaging Engineering,2019,40(5):144-148.
一种礼盒包装结构设计
Packaging Structural Design of a Gift Box
投稿时间:2018-06-30  修订日期:2019-03-10
DOI:10.19554/j.cnki.1001-3563.2019.05.019
中文关键词: 礼盒包装  堆码稳定性  易携带  环保  优化设计
英文关键词: gift box package  stack stability  easy to carry  environmentally friendly  optimal design
基金项目:
作者单位
崔爽 1.制造装备机构设计与控制重庆市重点实验室重庆 4000672.重庆工商大学重庆 400067 
徐绍虎 1.制造装备机构设计与控制重庆市重点实验室重庆 4000672.重庆工商大学重庆 400067 
摘要点击次数: 76
全文下载次数: 66
中文摘要:
      目的 设计一种可充分利用加工材料的礼盒包装。方法 采用1页纸板来设计礼盒,考虑到礼盒的美观性,采用正六棱柱结构,并利用提手和锁合结构来提高包装的便携性和堆码稳定性。结果 当2个半盖互锁部分宽度b,提手结构高度h1,礼盒底边长l,礼盒高度h满足一定关系时,可充分利用纸板材料。由外向内设计时,在l∶h∶b∶h1为1.732∶1∶1.5∶1.5的情况下,礼盒加工产生的余料最少;由内向外设计时,当l≤1.732h,在h1=3h?0.866l,b=4.5h?0.866l的情况下,礼盒加工产生的余料最少,当l﹥1.732h时,在h1=b=0.866l的情况下,礼盒加工产生的余料最少。结论 所设计礼盒外观呈正六棱柱,美观大方;锁合结构使得礼盒不会自动打开;提手和盒盖设计使得礼盒易于携带,堆码稳定性也得到提高;襟片设计未使用粘合剂粘合,这样更加环保。
英文摘要:
      The work aims to design a gift box package that can make full use of the processing materials. The gift box was designed by one page cardboard. Considering the aesthetics, the gift box adopted a regular hexagonal prism structure. Handle and locking structures were designed to improve the portability and stack stability. When the width of the two half lid interlocking part b, the handle structure height h1, the length of the bottom of the gift box l and the height h satisfied certain relations, the cardboard could be fully utilized. When l∶h∶b∶h1=1.732∶1∶1.5∶1.5, the gift box produced the least surplus material when designed from outside to inside. When l≤1.732h, h1=3h?0.866l, and b=4.5h?0.866l, the gift box produced the least surplus material by when designed from inside to outside. When l﹥1.732h and h1=b=0.866l, the gift box produced the least surplus material. The appearance of the gift box is regular hexagonal prism which is beautiful and generous. The gift box can not automatically open because of the locking structure. The handle and lid design make the gift box easy to carry and improve the stacking stability. The design of the flap is not bonded with adhesive, which is environmentally friendly.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第6029291位访问者    渝ICP备10003521号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编: 电话:023-68792294传真: Email:

    

渝公网安备 50010702501716号