文章摘要
范志锋.基于多软件联合的凸轮机构设计[J].包装工程,2019,40(3):174-178.
FAN Zhi-feng.Cam Mechanism Design Based on Multi-software Combination.Packaging Engineering,2019,40(3):174-178.
基于多软件联合的凸轮机构设计
Cam Mechanism Design Based on Multi-software Combination
投稿时间:2018-09-14  修订日期:2019-02-10
DOI:10.19554/j.cnki.1001-3563.2019.03.026
中文关键词: ADAMS  Matlab  SolidWorks  凸轮机构  滚子推杆  设计
英文关键词: ADAMS  Matlab  Solidworks  cam mechanism  roller putter  design
基金项目:湖北省高等学校创新能力提升计划(湖北省2011计划)(2013XTKY02);湖北省高等学校优秀中青年科技创新团队计划(T201833)
作者单位
范志锋 1.湖北省绿色风机协同创新中心武汉 4300652.武昌工学院 机械工程学院武汉 430065 
摘要点击次数: 110
全文下载次数: 121
中文摘要:
      目的 为了降低设计难度和缩短研制周期,提出基于Matlab,ADAMS和SolidWorks等3种软件联合进行滚子推杆复杂运动规律的凸轮机构仿真设计。方法 利用Matlab软件编程输出推杆的运动数据;基于ADAMS软件中的凸轮仿真工具箱得到理论轮廓的凸轮模型;在SolidWorks软件中利用理论轮廓的凸轮模型生成实际轮廓的凸轮三维模型。结果 基于3种软件最终获得了滚子推杆凸轮机构的实际轮廓曲线。结论 研究表明,基于ADAMS,Matlab和SolidWorks等3种软件进行滚子推杆复杂运动规律的凸轮机构三维建模,为设计凸轮机构提供了一种高效的通用方法,具有一定的推广应用价值。
英文摘要:
      The work aims to propose a cam mechanism simulation design based on three kinds of software (Matlab, ADAMS and SolidWorks) combined with the complicated motion law of roller putter, in order to reduce the design difficulty and shorten the development period. The motion data of the putter were outputted by Matlab programming. Based on the cam simulation toolbox in ADAMS software, the cam model of theoretical profile was obtained. In Solidworks software, the cam 3D model of actual profile was generated based on the cam model of theoretical profile. Based on three kinds of software, the actual profile curves of roller putter cam mechanism were finally obtained. The research shows that the 3D modeling of cam mechanism of complicated motion law of the roller putter based on three kinds of software (ADAMS, MATLAB and Solidworks) provides an efficient general method for designing cam mechanism, and has certain promotion and application value.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第6329236位访问者    渝ICP备10003521号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编: 电话:023-68792294传真: Email:

    

渝公网安备 50010702501716号