文章摘要
周宇,李建阳,邢伟,洪煌杰.回收用缓冲气囊关键技术研究进展[J].包装工程,2019,40(1):80-86.
ZHOU Yu,LI Jian-yang,XING Wei,HONG Huang-jie.Research Progress of Key Technologies of Airbag for Recovery.Packaging Engineering,2019,40(1):80-86.
回收用缓冲气囊关键技术研究进展
Research Progress of Key Technologies of Airbag for Recovery
投稿时间:2018-09-03  修订日期:2019-01-10
DOI:10.19554/j.cnki.1001-3563.2019.01.012
中文关键词: 回收  缓冲气囊  关键技术  研究进展
英文关键词: recovery  airbag  key technologies  research progress
基金项目:
作者单位
周宇 1.航天工程大学 士官学校北京 102249 
李建阳 1.航天工程大学 士官学校北京 102249 
邢伟 2.北京特种工程设计研究院北京 100028 
洪煌杰 3.工程兵科研一所无锡 214035 
摘要点击次数: 73
全文下载次数: 75
中文摘要:
      目的 综述国内外回收用缓冲气囊关键技术的研究进展,为缓冲气囊在大型舱体回收中的应用与研究提供基础。方法 通过对国内外研究现状和研究成果的分析和总结,介绍国内外在缓冲气囊的关键技术(气囊充气技术、排气孔爆破压力控制技术、排气孔面积控制技术和气囊增压技术)方面的研究进展,最后对气囊试验验证技术进行分析梳理。结论 国内在回收用缓冲气囊关键技术上的研究,尤其是在大型舱体回收中的应用研究较少,还需要借鉴国外成功经验,进一步深入研究回收用缓冲气囊的关键技术,为缓冲气囊在重型装备和航天器回收中的应用提供支持。
英文摘要:
      The work aims to summarize the research progress of key technologies of the airbag for recovery at home and abroad to provide a basis for the application and research of the airbag in large-scale cabin recovery. Through the analysis and summary of the present research situation and research results at home and abroad, the research progress of key technologies (gas-charging technology, control technology of airbag venting pressure, control technology of airbag vent area and airbag pressurization technology) of airbag at home and abroad was introduced. Finally, the experimental verification technology of airbag was analyzed and combed. Domestic research on the key technologies of the airbag for recovery, especially the applied research in the large-scale cabin recovery, is few, and such key technologies need to be further studied with reference to foreign successful experiences to provide support for the application of the airbag in the recovery of heavy equipment and spacecraft.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第5477185位访问者    渝ICP备10003521号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编: 电话:023-68792294传真: Email:

    

渝公网安备 50010702501716号