文章摘要
孙德强,金强维,李国志,史英惠,李耿,李靖靖,胡昕,邢月卿.发泡聚丙烯材料的动态力学行为研究[J].包装工程,2019,40(1):63-68.
SUN De-qiang,JIN Qiang-wei,LI Guo-zhi,SHI Ying-hui,LI Geng,LI Jing-jing,HU Xin,XING Yue-qing.Dynamic Mechanical Behaviour of Expanded Polypropylene Materials[J].Packaging Engineering,2019,40(1):63-68.
发泡聚丙烯材料的动态力学行为研究
Dynamic Mechanical Behaviour of Expanded Polypropylene Materials
投稿时间:2018-05-22  修订日期:2019-01-10
DOI:10.19554/j.cnki.1001-3563.2019.01.009
中文关键词: 发泡聚丙烯材料  动态压缩  厚度  冲击能  吸收能
英文关键词: expanded polypropylene materials  dynamic compression  thickness  impact energy  absorption energy
基金项目:国家自然科学基金(51575327);陕西省教育厅重点实验室及基地项目(16JS014);陕西省教育厅2014陕西本科高校专业综合改革试点子项目(陕教高[2014]16号)
作者单位
孙德强 陕西科技大学 a.陕西省造纸技术及特种纸品开发重点试验室 b.轻化工程国家级试验教学示范中心西安 710021 
金强维 陕西科技大学 a.陕西省造纸技术及特种纸品开发重点试验室 b.轻化工程国家级试验教学示范中心西安 710021 
李国志 陕西科技大学 a.陕西省造纸技术及特种纸品开发重点试验室 b.轻化工程国家级试验教学示范中心西安 710021 
史英惠 陕西科技大学 a.陕西省造纸技术及特种纸品开发重点试验室 b.轻化工程国家级试验教学示范中心西安 710021 
李耿 陕西科技大学 a.陕西省造纸技术及特种纸品开发重点试验室 b.轻化工程国家级试验教学示范中心西安 710021 
李靖靖 陕西科技大学 a.陕西省造纸技术及特种纸品开发重点试验室 b.轻化工程国家级试验教学示范中心西安 710021 
胡昕 陕西科技大学 a.陕西省造纸技术及特种纸品开发重点试验室 b.轻化工程国家级试验教学示范中心西安 710021 
邢月卿 陕西科技大学 a.陕西省造纸技术及特种纸品开发重点试验室 b.轻化工程国家级试验教学示范中心西安 710021 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究发泡聚丙烯材料的厚度对其冲击性能的影响。方法 对4种不同厚度的发泡聚丙烯材料进行动态压缩试验,分析其接触力、最大位移、最大应变以及吸收能,研究动态条件下发泡聚丙烯材料的力学性能。结果 当冲击能一定时,增加发泡聚丙烯材料的厚度,其接触力会逐渐减小,接触时间会逐渐增加;冲击能和厚度一定时,厚度与最大位移、吸收能成正比例相关,但对最大接触力和最大应变无明显影响;任意厚度的发泡聚丙烯材料,其冲击能和厚度的增加会导致其最大接触力、最大位移、最大应变、吸收能的增加。结论 在研究的冲击能量和厚度范围内,吸收能不受发泡聚丙烯材料厚度的影响,由冲击能决定。
英文摘要:
      The work aims to study the influence of thickness of expanded polypropylene material on its impact performance. The dynamic compression tests were carried out on four kinds of expanded polypropylene materials with different thicknesses to analyze their contact force, maximum displacement, maximum strain and absorption energy. The mechanical properties of expanded polypropylene material under dynamic conditions were studied. When the impact energy was constant, the contact force would decrease gradually and the contact time would increase gradually as the thickness of the expanded polypropylene material increased. When the impact energy and thickness were constant, the thickness was directly proportional to the maximum displacement and absorption energy, but had no obvious influence on the maximum contact force and maximum strain. The increase of impact energy and thickness of expanded polypropylene material of any thickness would lead to the increase of its maximum contact force, maximum displacement, maximum strain and absorption energy. Within the range of impact energy and thickness studied, the absorption energy is not affected by the thickness of expanded polypropylene material, but is determined by impact energy.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21235470位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号