吴应强,童泽平,任亮.三维紧致化存储系统中出入口位置的优化研究[J].包装工程,2018,39(19):117-123.
WU Ying-qiang,TONG Ze-ping,REN Liang.Optimization of I/O Point in 3D Compact Storage System[J].Packaging Engineering,2018,39(19):117-123. |
| 三维紧致化存储系统中出入口位置的优化研究 |
| Optimization of I/O Point in 3D Compact Storage System |
| 投稿时间：2018-06-11 修订日期：2018-10-10 |
| DOI：10.19554/j.cnki.1001-3563.2018.19.021 |
| 中文关键词: 自动化存储系统 双命令存储 系统出入口 |
| 英文关键词: automatic storage system dual-command storage input/output point of the system |
| 基金项目:湖北省教育厅科学技术研究项目（Q20171104） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 解决三维紧凑型存储系统的设计问题，寻求系统出入口的最佳位置。方法 建立数学模型，并优化求解，研究自动化仓储系统出入口位置的设计问题。结果 在双命令存储模式下，当三维紧致化仓储系统的系统出入口位置在货架底端1/2位置时，双命令行程期望时间最少。结论 通过假设出入口的位置，列出共计24种双命令下存取货物的期望时间模型，并进行了求导分析，发现在双命令存储模式下系统出入口最优点即为货架底端中点处。 |
| 英文摘要: |
| The work aims to solve the design problem of the 3D compact storage system and seek the best position to enter and exit the system. Mathematical models were established and the solutions were optimized to study the design issues of the entrance and exit position of the automatic storage system. In the dual-command storage mode, the expected time of dual-command travel was the least when the entrance and exit position of the 3D compact storage system was at the midpoint of the bottom of the shelf. Based on the assumptions on the entrance and exit position, a total of 24 expected time models for delivering and accessing the goods under dual commands are listed, and the derivation and analysis are conducted to find out that the optimal input/output point of the system in the dual-command storage mode is the midpoint of the bottom of the shelf. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号