陈锐鸿.基于PLC控制的多工位码垛系统设计与实现[J].包装工程,2018,39(17):159-164.
CHEN Rui-hong.Design and Implementation of Multi-station Palletizing System Based on PLC Control[J].Packaging Engineering,2018,39(17):159-164. |
| 基于PLC控制的多工位码垛系统设计与实现 |
| Design and Implementation of Multi-station Palletizing System Based on PLC Control |
| 投稿时间：2018-05-10 修订日期：2018-09-10 |
| DOI：10.19554/j.cnki.1001-3563.2018.17.026 |
| 中文关键词: 多工位码垛 工业机器人系统 可移动底座 PLC |
| 英文关键词: multi-station palletizing industrial robot system movable chassis PLC |
| 基金项目:广东省本科高校高等教育教学改革项目（JY170309） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 为拓展工业机器人的有效工作范围。方法 采用三菱Q系列PLC和定位模块QD75MH1搭建一套完善的工业机器人移动底座系统，用于机器人的位置调动，有效扩展工作范围。结果 选用四工位码垛装箱工作站为应用案例，系统工作稳定，工业机器人的工作范围由原来的2个工位扩展到4个工位，使用1台工业机器人即可完成4个工位的工作，包装效率提升了2倍。结论 该系统在多工位的码垛、装箱、搬运等场合具有很好的参考价值。 |
| 英文摘要: |
| The work aims to expand the effective working scope of industrial robots. A set of complete movable chassis system for industrial robot was established with MITSUBISHI Q series PLC and location module QD75MH1 to mobilize the location of the robot and effectively expand the working scope. Taking four-station palletizing and packaging workstation as an example, the system worked stably, and the working scope of industrial robot was expanded to 4 stations from 2 stations. The work of 4 stations could be com-pleted by 1 industrial robot and the packaging efficiency was increased by 2 times. The system has a good reference value in multi-station palletizing, packaging, handling and other occasions. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号