侯立功,陈天娥,史荧中.基于模糊控制的包装膜自动纠偏系统设计[J].包装工程,2018,39(15):130-134.
HOU Li-gong,CHEN Tian-e,SHI Ying-zhong.Design of Automatic Correction System for Packaging Films Based on Fuzzy Control[J].Packaging Engineering,2018,39(15):130-134. |
| 基于模糊控制的包装膜自动纠偏系统设计 |
| Design of Automatic Correction System for Packaging Films Based on Fuzzy Control |
| 投稿时间：2017-06-13 修订日期：2018-08-10 |
| DOI：10.19554/j.cnki.1001-3563.2018.15.020 |
| 中文关键词: 包装膜 纠偏 模糊控制 嵌入式系统 |
| 英文关键词: packaging film correction fuzzy control embedded system |
| 基金项目:国家自然科学基金（青年科学基金） （61502204）；江苏高校品牌专业建设工程资助项目（PPZY2015C240）；江苏省青蓝工程科技创新团队（苏教师[2014]23 号） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 为了解决包装过程中薄膜纵向跑偏，以及常规控制方法性能较差等问题。方法 基于模糊控制设计一种包装膜自动纠偏系统。分析包装薄膜跑偏的原因，并给出自动纠偏装置结构。在此基础上，建立纠偏系统数学模型，同时设计一种模糊控制器。利用 MCF52235 嵌入式芯片给出控制器的硬件结构。最后进行试验验证。结果 跑偏量绝对值的最大值仅为 0.4 mm，满足包装工艺控制要求。结论 所述模糊控制方法能够有效地改善系统纠偏能力，具有较好的动态响应性能。 |
| 英文摘要: |
| The work aims to solve the problems like films' longitudinal deviation and poor performance of conventional control methods in the packaging process. An automatic correction system of packaging films was designed based on fuzzy control. The reasons for packaging film deviation were analyzed and the automatic correction device structure was also given. On this basis, the mathematical model of correction system was established and a fuzzy controller was designed. The hardware structure of the controller was presented by MCF52235 embedded chip. Finally, the test verification was carried on. The maximum absolute value of deviations was only 0.4 mm and it could satisfy the requirements of packaging process control. The proposed fuzzy control method can effectively improve system correction ability and it has better dynamic response performance. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号