文章摘要
梅小虎,向红,吴迪,曹庸,吴定橙,潘青青.酱油渣与淀粉复合可食膜制备工艺[J].包装工程,2018,39(15):50-58.
MEI Xiao-hu,XIANG Hong,WU Di,CAO Yong,WU Ding-cheng,PAN Qing-qing.Preparation Technology of Compound Edible Films Made of Starch and Soy Sauce Residue[J].Packaging Engineering,2018,39(15):50-58.
酱油渣与淀粉复合可食膜制备工艺
Preparation Technology of Compound Edible Films Made of Starch and Soy Sauce Residue
投稿时间:2018-05-08  修订日期:2018-08-10
DOI:10.19554/j.cnki.1001-3563.2018.15.008
中文关键词: 酱油渣  淀粉  可食膜  响应面法
英文关键词: soy sauce residue  starch  edible films  response surface method
基金项目:广东省科技计划(2015B020230008)
作者单位
梅小虎 1.华南农业大学 食品学院广州 510642 
向红 1.华南农业大学 食品学院广州 510642 
吴迪 1.华南农业大学 食品学院广州 510642 
曹庸 1.华南农业大学 食品学院广州 5106422.广东省天然活性物工程技术研究中心广州 510642 
吴定橙 1.华南农业大学 食品学院广州 510642 
潘青青 1.华南农业大学 食品学院广州 510642 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究了以淀粉和酱油渣为主要原料的可食膜制备工艺与性能。方法 以膜拉伸强度为指标,在单因素实验基础上利用响应面法分析最佳配方和制备工艺,并通过红外光谱和扫描电镜对复合膜相关结构进行表征。结果 在干燥温度 76 ℃、玉米淀粉质量分数 6.5%、酱油渣质量分数 1.5%、甘油质量分数 27.0%时,制得的可食膜厚度为 0.145 mm,拉伸性能最佳,强度为 14.26 MPa,断裂伸长率为 7.82%。结论 添加适量酱油渣可以使淀粉膜的结构更加稳定,抗拉强度增大,并且可以溶解在水中,可以进一步应用于可食内包装袋。
英文摘要:
      The work aims to study the preparation technology and performance of edible films with starch and soy sauce residue as the main raw materials. On the basis of single factor experiments, with the tensile strength of the film as the indicator, the response surface method was used to analyze the optimal formula and preparation technology. The relevant structure of the compound films was characterized by infrared spectroscopy and scanning electron microscopy (SEM). When the drying temperature was 76 ℃, mass fractions of corn starch, soy sauce residue and glycerin were respectively 6.5%, 1.5% and 27.0%, the thickness of the prepared edible film was 0.145 mm, the tensile strength (14.26 MPa) was the best and the elongation at break was 7.82%. An appropriate amount of soy sauce residue added can make the starch film structure more stable and increase the tensile strength. The film can be dissolved in water and further applied in the edible inner packaging bag.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21161774位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号