文章摘要
邓瑞,徐卓飞,徐倩倩,侯和平,张海燕.基于声场图像分析的印刷机轴承故障诊断方法[J].包装工程,2018,39(9):151-157.
DENG Rui,XU Zhuo-fei,XU Qian-qian,HOU He-ping,ZHANG Hai-yan.Fault Diagnosis Method of Printing Press Bearings Based on Image Analysis of Sound Field[J].Packaging Engineering,2018,39(9):151-157.
基于声场图像分析的印刷机轴承故障诊断方法
Fault Diagnosis Method of Printing Press Bearings Based on Image Analysis of Sound Field
投稿时间:2017-12-02  修订日期:2018-05-10
DOI:10.19554/j.cnki.1001-3563.2018.09.027
中文关键词: 声场  二维经验模式分解  故障诊断  印刷机.
英文关键词: sound field  bidimensional empirical mode decomposition  fault diagnosis  printing press
基金项目:陕西省自然科学基础研究计划(2017JQ5012);陕西省教育厅科学研究计划自然专项项目(17JK0545)
作者单位
邓瑞 西安理工大学西安 710048 
徐卓飞 西安理工大学西安 710048 
徐倩倩 西安理工大学西安 710048 
侯和平 西安理工大学西安 710048 
张海燕 西安理工大学西安 710048 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 针对印刷机墨辊轴承的故障信息获取及诊断难等问题,提出一种基于声场图像分析的故障诊断与定位方法。方法 首先,构建声音测试系统并划分检测对象的空间区域,逐一采集信号并依据对应空间位置关系进行重构与组合;其次,将一段时间内的信号能量进行叠加,同时依据空间位置关系形成叠加状态的声场图像信息;然后,引入二维经验模式分解(BEMD)分析空间域图像信息,消除环境噪声干扰并得到声场图像的高频信息。结果 对不同位置、不同种类的墨路系统故障轴承进行特征分析与比对,利用IBIMF分量及统计特征实现了轴承内、外圈故障的诊断,利用无量纲特征实现了不同故障位置的有效定位,并通过实验验证了方法的有效性。结论 所提出故障诊断方法发挥了非接触测量优势,同时具有较强故障表征能力,适用于同类复杂机械系统。
英文摘要:
      The work aims to propose a fault diagnosis and locating method based on image analysis of sound field with respect to the difficulty in acquiring and diagnosing fault information of ink roller bearing in printing press. Firstly, the sound test system was constructed and the space area of detected object was divided. The signals were acquired one by one for reconstruction and combination according to the corresponding spatial location relationship. Then, the signal energy in a period of time was superimposed and the sound field image information in the superposition state was formed based on the spatial location relationship. Next, bidimensional empirical mode decomposition (BEMD) was introduced to analyze the spatial domain image information and get the high-frequency information through the elimination of ambient noise interference. Feature analysis and comparison of fault bearings for the ink roller system at different positions and of different kinds were carried out. The diagnosis of faults in inner and outer rings of the bearing was realized by means of IBIMF component and statistical characteristics. The effective locating of different fault positions was achieved through dimensionless characteristics and the effectiveness of the method was verified by experiments. The proposed fault diagnosis method makes the most of non-contact measurement and has a strong ability to characterize the faults, which is suitable for similar complex mechanical systems.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20810622位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号