文章摘要
王雪姣,李新娥,李杨.基于智能电子标签的贮运环境监测系统设计[J].包装工程,2018,39(1):12-16.
WANG Xue-jiao,LI Xin-e,LI Yang.Design of Storage and Transportation Environment Monitoring System Based on Intelligent Electronic Tag[J].Packaging Engineering,2018,39(1):12-16.
基于智能电子标签的贮运环境监测系统设计
Design of Storage and Transportation Environment Monitoring System Based on Intelligent Electronic Tag
投稿时间:2017-04-20  修订日期:2018-01-10
DOI:
中文关键词: 贮运监测  电子标签  信息采集
英文关键词: storage and transportation monitoring  electronic tags  information collection
基金项目:
作者单位
王雪姣 中北大学 电子测试技术国家重点实验室太原 030051 
李新娥 中北大学 电子测试技术国家重点实验室太原 030051 
李杨 中北大学 电子测试技术国家重点实验室太原 030051 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 加强贮运过程的监督管理,保障物流物品的安全。方法 设计由智能电子标签、智能移动终端和管理系统组成的贮运环境监测系统。结果 智能电子标签能完成物品在仓库贮存和运输过程中对温度、湿度、冲击振动加速度等环境参数的实时采集和存储,同时记录事件发生的时间;智能移动终端用来移动读取传感器信息和存储模块内的测试数据,且能与上位机进行通信,把数据上传至计算机,写入物流数据库;上位机管理系统可以对智能移动终端和智能电子标签进行配置。通过对系统进行小环境试验,在高低温箱内对环境参数进行采集,温度误差为±0.5 ℃,相对湿度误差为±1%,冲击台试验加速度误差为±2g。结论 通过温度及冲击试验验证,所设计电子标签对于环境参数的监测可行且稳定性好。
英文摘要:
      The work aims to strengthen the supervision and management of the storage and transportation process, to ensure the safety of logistics items. A storage and transportation environment monitoring system composed of intelligent electronic tags, intelligent mobile terminals, intelligent mobile terminals and management system was designed. The intelligent electronic tags could collect and store such environmental parameters as temperature, humidity, impact acceleration and vibration acceleration in the process of warehousing and transporting the items in real time, while recording the time of the incident. The intelligent mobile terminal was used to movably read the test data in the sensor information and storage module and communicate with the host computer to upload the data to the computer and write in the logistics database. The management system of host computer could configure the intelligent mobile terminal and intelligent electronic tag. Based on the small environment test of the system, the environmental parameters in the high-low temperature chamber were collected. The temperature error was ±0.5 ℃, the relative humidity was ±1% and the acceleration error of impact table test was ±2g. Through the verification by the temperature and impact experiments, the feasibility and stability of monitoring the environmental parameters of electronic tags designed are good.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20801257位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号