文章摘要
张潮.SiC填充PP/FA复合材料拉伸强度及分形特征[J].包装工程,2017,38(23):78-82.
ZHANG Chao.Tensile Strength and Fractal Characteristics of SiC Filled PP/FA Composites[J].Packaging Engineering,2017,38(23):78-82.
SiC填充PP/FA复合材料拉伸强度及分形特征
Tensile Strength and Fractal Characteristics of SiC Filled PP/FA Composites
投稿时间:2017-08-11  修订日期:2017-12-10
DOI:
中文关键词: 聚丙烯  拉伸强度  分形维数  包装材料
英文关键词: polypropylene  tensile strength  fractal dimension  packaging materials
基金项目:
作者单位
张潮 郑州电力高等专科学校郑州 450004 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 定量研究不同含量碳化硅晶须(SiC)对聚丙烯(PP)/粉煤灰(FA)复合材料拉伸强度以及拉伸断口复杂程度的影响。方法 以聚丙烯为基体,马来酸酐接枝聚丙烯(PP-g-MAH)为相容剂,FA和SiC为填料,采用熔融共混法制备PP/FA/SiC复合材料。利用电子万能试验机测试复合材料的拉伸强度,同时采用扫描电镜对拉伸断口进行形貌分析,并基于分形原理,利用差分盒维计数法计算复合材料拉伸断面的分形维数,分析研究复合材料拉伸断面的分形维数与其拉伸强度间的关系。结果 复合材料的拉伸断面分形维数在1.24~1.90之间,相关系数均大于0.9,说明其具有统计意义上的自相似和较强的相关性。结论 复合材料拉伸强度的对数与其断面的分形维数呈线性函数关系。
英文摘要:
      The work aims to quantitatively study the effect of different contents of SiC whisker (SiC) on the tensile strength and tensile fracture complexity of polypropylene (PP)/fly ash (FA) composites. Firstly, PP/FA/SiC composites were prepared by melt blending method with PP as the matrix, maleic anhydride graft polypropylene (PP-g-MAH) as the compatibilizer, and FA and SiC as the filler. Secondly, the tensile strength of the composites was tested by the electronic universal tester; meanwhile, the tensile fracture pattern was analyzed by SEM. Then, based on the fractal principle, the fractal dimension of the composite's tensile fracture was calculated by the difference box dimension counting method, and the relationship between the fractal dimension of the tensile fracture and the tensile strength of the composites was analyzed and studied. As a result, the fractal dimension of tensile fracture of the composites was between 1.24 and 1.90, and the correlation coefficient was more than 0.9, which indicated that it had statistically significant self-similarity and strong correlation. In conclusion, the logarithm of the tensile strength of the composites is in a linear functional relationship with the fractal dimension of the fracture.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20797135位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号