文章摘要
刘怀海,傅向葵,肖雪,张国全.瓷质焊接衬垫包装生产线的设计[J].包装工程,2017,38(21):154-158.
LIU Huai-hai,FU Xiang-kui,XIAO Xue,ZHANG Guo-quan.Design of Packaging Production Line for Ceramic Welding Backing[J].Packaging Engineering,2017,38(21):154-158.
瓷质焊接衬垫包装生产线的设计
Design of Packaging Production Line for Ceramic Welding Backing
投稿时间:2017-04-28  修订日期:2017-11-10
DOI:
中文关键词: 瓷质  衬垫  衬垫排序  姿态识别  划线
英文关键词: ceramic  backing  backing sorting  posture recognition  marking
基金项目:
作者单位
刘怀海 长江大学工程技术学院荆州 434020 
傅向葵 武汉轻工大学武汉 430000 
肖雪 长江大学工程技术学院荆州 434020 
张国全 武汉轻工大学武汉 430000 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 开发一套瓷质焊接衬垫全自动包装生产线,以降低企业生产压力,提高生产效率。方法 基于衬垫的物性,采用输送带分隔提升,消除瓷质焊接衬垫多块重叠问题;利用模式识别技术,提出输送带上8种姿态的瓷质焊接衬垫的外形识别方法;根据辊盘划线原理,提出瓷质焊接衬垫组中心线绘制的工艺方法。结果 将20块同向瓷质焊接衬垫有序排列且粘贴在基材上,实现了衬垫组粘贴的自动化。结论 通过对瓷质焊衬垫包装技术的研究,提出了外形复杂且同向排序的工艺方法。
英文摘要:
      The work aims to develop a set of automatic packaging production line for ceramic welding backing, in order to reduce the enterprise production pressure and improve the production efficiency. Based on the physical properties of backing, the conveyor belt was used for separating and ascension to eliminate the multi-block overlap of ceramic welding backing. Pattern recognition technology was used to propose the shape recognition method for ceramic welding backing of eight postures on the conveyor belt. According to the principle of the roller plate line, the technological approach drawing a center line was put forward for ceramic welding backing set. 20 blocks of synclastic ceramic welding backing were arranged orderly and pasted on the base material, so that the automatic pasting of backing set was achieved. Based on the research of packaging technology for the ceramic welding backing, the technological approach of intricate shape and synclastic sorting is proposed.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20815682位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号