文章摘要
李荣博,刘晓强,龚嶷,沈勇坚,沈光耀,苏有学.新燃料运输容器聚氨酯泡沫填充材料性能研究[J].包装工程,2017,38(21):10-14.
LI Rong-bo,LIU Xiao-qiang,GONG Yi,SHEN Yong-jian,SHEN Guang-yao,SU You-xue.Properties of Polyurethane Foam Filled in New Fuel Transport Cask[J].Packaging Engineering,2017,38(21):10-14.
新燃料运输容器聚氨酯泡沫填充材料性能研究
Properties of Polyurethane Foam Filled in New Fuel Transport Cask
投稿时间:2017-08-23  修订日期:2017-11-10
DOI:
中文关键词: 新燃料  运输容器  硬质聚氨酯泡沫  性能测试  寿命预测
英文关键词: new fuel  transport cask  rigid polyurethane foam  performance test  life prediction
基金项目:国家科技重大专项(2017ZX06002004)
作者单位
李荣博 上海核工程研究设计院有限公司上海 200233 
刘晓强 上海核工程研究设计院有限公司上海 200233 
龚嶷 复旦大学上海 200433 
沈勇坚 上海核工程研究设计院有限公司上海 200233 
沈光耀 上海核工程研究设计院有限公司上海 200233 
苏有学 陕西特种橡胶制品有限公司咸阳 712042 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 对新燃料运输容器聚氨酯泡沫填充材料进行性能测试、寿命预测,验证其是否满足新燃料运输容器设计性能要求和使用寿命要求。方法 分别测试填充在新燃料运输容器不同区域的硬质聚氨酯泡沫的压缩性能、吸水性能、阻燃性能、隔热性能,并利用热重分析方法研究硬质聚氨酯泡沫填充材料的热老化性能,预测寿命。结果 根据测试结果,研制的硬质聚氨酯泡沫能够满足新燃料运输容器填充材料的设计性能要求和使用寿命要求,在最高正常使用温度38 ℃条件下,预测其寿命为34年。结论 在新燃料组件正常运输工况和事故运输工况条件下,硬质聚氨酯泡沫填充材料均能对燃料组件起到良好的保护作用,为实现新燃料运输容器国产化奠定了基础。
英文摘要:
      The work aims to conduct performance test and life prediction on the polyurethane foam filled in new fuel transport cask, so as to verify whether it meets the requirements of design performance and lifetime of the new fuel transport cask. The compression performance, water absorption, flame retardation and thermal insulation of rigid polyurethane foam filled in different parts of the new fuel transport cask were respectively tested. The heat aging property of rigid polyurethane foam fillings was studied by means of thermogravimetric analysis to predict its lifetime. According to the test results, the rigid polyurethane foam developed could comply with the requirements of design performance and lifetime of the new fuel transport cask. It was predicted that the lifetime was 34 years at 38 ℃. Under the condition of normal and accident transportation, the rigid polyurethane foam fillings are capable of properly protecting the fuel assembly. It establishes foundation for the localization of manufacturing new fuel transport cask.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21146124位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号