杨健,王艳芳,豆昌军.基于Ansys Workbench的特殊高速绞龙螺旋设计[J].包装工程,2017,38(15):126-131.
YANG Jian,WANG Yan-fang,DOU Chang-jun.Design of Special High-Speed Auger Screw Based on Ansys Workbench[J].Packaging Engineering,2017,38(15):126-131. |
| 基于Ansys Workbench的特殊高速绞龙螺旋设计 |
| Design of Special High-Speed Auger Screw Based on Ansys Workbench |
| 投稿时间：2017-02-18 修订日期：2017-08-10 |
| DOI： |
| 中文关键词: 高速绞龙螺旋 优化设计 有限元分析 |
| 英文关键词: high-speed auger screw optimal design finite element analysis |
| 基金项目:成都理工大学机械工程专业教学创新团队项目（10912-JXTD201501） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 通过分析高速绞龙螺旋的设计要求，研究高速绞龙螺旋的实际工作条件，确定高速绞龙螺旋的结构设计参数。方法 运用SolidWorks三维建模软件建立三维几何模型，并导入Ansys Workbench有限元分析软件中，对其分别进行静力学分析和模态分析。结果 通过仿真分析和优化，高速绞龙螺旋结构的质量、总变形量和等效应力都减少了10%以上。结论 通过对高速绞龙螺旋结合实际工作条件的仿真分析和优化，确定了高速绞龙螺旋的材料、内径和转速等参数。 |
| 英文摘要: |
| The work aims to research the actual working conditions of high-speed auger screw to determine its structural design parameters by analyzing the design requirements of high-speed auger screw. The 3D geometric model established by the Solidworks 3D modeling software was imported into ANSYS Workbench (finite element analysis software). Moreover, its static analysis and modal analysis were separately conducted. Through the simulation analysis and optimization, the quality, total deformation and equivalent stress of the high-speed auger screw were all reduced by more than 10%. Based on the simulation analysis and optimization of the actual working conditions of the high-speed auger screw, the parameters, such as the material, inner diameter and rotational speed of the high-speed auger screw, are determined. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号