文章摘要
郭露,徐长妍,王希,林扬帆,李忆佳,季伟.磁性石墨烯的制备初探[J].包装工程,2017,38(13):32-35.
GUO Lu,XU Chang-yan,WANG Xi,LIN Yang-fan,LI Yi-jia,JIA Wei.Preparation of Magnetic Graphene[J].Packaging Engineering,2017,38(13):32-35.
磁性石墨烯的制备初探
Preparation of Magnetic Graphene
投稿时间:2017-03-21  修订日期:2017-07-10
DOI:
中文关键词: 石墨烯  磁性化  定向排列  制备方法
英文关键词: graphene  magnetization  alignment  preparation method
基金项目:国家重点研发计划(2016YFD0600703)
作者单位
郭露 南京林业大学南京 210037 
徐长妍 南京林业大学南京 210037 
王希 南京林业大学南京 210037 
林扬帆 南京林业大学南京 210037 
李忆佳 南京林业大学南京 210037 
季伟 南京林业大学南京 210037 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 制备磁性石墨烯,实现其定向排列,为进一步制备性能良好的热界面材料提供定向导热相。方法 采用聚合物包覆和层层组装技术,在石墨烯表面均匀包覆带负电荷的聚磺苯乙烯(PSS)聚电解质层,然后在静电力作用下包覆一层带正电荷的聚二烯丙基二甲基氯化铵(PDDA)聚电解质。最后,借助静电力使带负电荷的磁性Fe3O4纳米粒子在附着有PDDA层的石墨烯表面形成均匀的致密覆盖层,得到磁性石墨烯,并在外磁场作用下使磁性石墨烯进行定向排列。结果 采用聚电解质层层组装技术可有效地对石墨烯进行磁性化处理;粉状石墨烯比片状石墨烯定向排列效果明显;以片状石墨烯为原材料的实验条件下,加入聚电解PSS、PDDA的量越多,磁性化效果更佳。结论 通过聚电解质层层组装技术可有效地对石墨烯进行磁性化处理,并在磁场作用下实现定向排列。
英文摘要:
      The work aims to prepare magnetic graphene and achieve its alignment, in order to provide a directional thermal phase for further preparation of well-formed thermal interface materials. By means of polymer cladding and layer-by-layer assembly technique, the graphene surface uniformly was coated with a negatively charged polystyrene sulronate (PSS) polyelectrolyte layer firstly, and then under the action of electrostatic force, it was coated with a layer of positively charged poly diallyldimethyl ammonium chloride (PDDA) polyelectrolyte, and finally by means of an electrostatic force, the negatively charged Fe3O4 magnetic nanoparticles formed a uniform dense covering layer on the graphene surface attached with PDDA layer, to obtain magnetic graphene. The magnetic graphene was aligned under the external magnetic field. The results showed that the graphene could be magnetized effectively by the polyelectrolyte layer-by-layer assembly technique. The alignment effect of powdery graphene was better than that of flaky graphene. The more the polyelectrolyte PSS and PDDA were added, the better the magnetic effect was, under the experimental conditions that took flaky graphene as raw material. By using the polyelectrolyte layer-by-layer assembly technique, the graphene can be magnetized effectively and aligned under the action of the magnetic field.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21240565位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号