文章摘要
刘伟.基于Study参数分析Delta机构运动约束[J].包装工程,2017,38(9):183-187.
LIU Wei.Analysis of Kinematic Constraints of Delta Mechanism Based on Study Parameters[J].Packaging Engineering,2017,38(9):183-187.
基于Study参数分析Delta机构运动约束
Analysis of Kinematic Constraints of Delta Mechanism Based on Study Parameters
投稿时间:2016-09-08  修订日期:2017-05-10
DOI:
中文关键词: study参数  驱动副分布  Delta  运动约束
英文关键词: study parameters  driven joint distribution  Delta  kinematic constraint
基金项目:
作者单位
刘伟 西安工程大学西安 710048 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究Delta并联机构分支数目和驱动副分布对机构运动约束的影响。方法 使用Study参数表示刚体的位移、姿态变换矩阵,根据运动链D-H参数,建立运动链约束方程,再进行坐标变换得到分支约束方程,分析驱动副分布对Delta类并联机构运动约束的影响。结果 分支数目为3和4时,驱动副无论如何分布,delta并联机构只具有移动的运动特征。结论 用统一的表达式来表示Delta并联机构的约束情况更为直观,也为Delta并联机构设计优化提供了新的思路。
英文摘要:
      The work aims to study the number of branches of Delta parallel mechanism and the influence of driven joint distribution on the kinematic constraints of mechanism. Study parameters were used to represent the displacement and attitude transformation matrix of a rigid body. According to the D-H parameters of kinematic chain, constraint equations of kinematic chain were established, and then the branch constraint equations through coordinate transformation were obtained. The effect of driven joint distribution on the kinematic constraints of Delta parallel mechanism was analyzed. When the branch number was 3 and 4, no matter how the driven joint was distributed, the delta parallel mechanism was only characterized by movement. The unified expression used to indicate the constraining conditions of Delta parallel mechanism is more intuitive, and provides a new idea for its optimized design.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20815167位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号