文章摘要
闫茹,安改娣,焦建.基于DSP的定量包装控制系统设计[J].包装工程,2017,38(5):167-170.
YAN Ru,AN Gai-di,JIAO Jian.Design of Control System for Quantitative Weighing and Packaging Based on DSP[J].Packaging Engineering,2017,38(5):167-170.
基于DSP的定量包装控制系统设计
Design of Control System for Quantitative Weighing and Packaging Based on DSP
投稿时间:2016-12-07  修订日期:2017-03-10
DOI:
中文关键词: 定量称量  触摸屏  DSP  软件
英文关键词: quantitative weighing  touch screen  DSP  software
基金项目:内蒙古自治区高等学校科学研究项目(NGJGH2012051)
作者单位
闫茹 内蒙古化工职业学院呼和浩特 010010 
安改娣 内蒙古化工职业学院呼和浩特 010010 
焦建 内蒙古化工职业学院呼和浩特 010010 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为提高定量称量包装机的包装速度和包装精度,设计一种高精度的称量包装控制系统。方法 介绍定量称量包装机的机械结构以及工作原理,在此基础上设计一种以触摸屏和基于DSP为核心的定量称量包装控制系统,并详细论述基于DSP和触摸屏的硬件结构。在硬件结构的基础上,开发与之配套的定量称量包装的控制系统软件。结果 称量包装的最大相对误差不超过±0.6%。结论 该控制系统提高了定量称量包装机的精度、可靠性和可操作性。
英文摘要:
      The work aims to design a high-precision control system for weighing and packaging, in order to improve the packaging speed and accuracy of quantitative weighing packaging machine. The mechanical structure and working principle of quantitative weighing packaging machine were introduced. According to this, a kind of DSP-based touch-screen quantitative weighing packaging control system was designed, and the hardware structure based on DSP and touch screen was described in detail. Finally, on the basis of hardware structure, the control system software for quantitative weighing and packaging was developed. The experimental results showed that the maximum relative error of weighing and packaging was no more than ±0.6%. The control system improves the accuracy, reliability and operability of the quantitative weighing packaging machine.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20800879位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号