文章摘要
李小东,邹洋,张彦粉,冯利军.响应面法优化白墨在镭射卡纸上的附着力性能[J].包装工程,2016,37(23):171-175.
LI Xiao-dong,ZOU Yang,ZHANG Yan-fen,FENG Li-jun.Optimization of Adhesion Performance of White Ink on Laser Paper in Response Surface Method[J].Packaging Engineering,2016,37(23):171-175.
响应面法优化白墨在镭射卡纸上的附着力性能
Optimization of Adhesion Performance of White Ink on Laser Paper in Response Surface Method
投稿时间:2016-09-14  修订日期:2016-12-10
DOI:
中文关键词: UV白墨  镭射卡纸  印刷工艺  响应面实验方法
英文关键词: UV white ink  laser paper  printing process  response surface experimental method
基金项目:2014年东莞市社会发展项目(2014106101036);2015年广东省质量工程项目(GDJG2015001,GDJG2015005)
作者单位
李小东 东莞职业技术学院东莞 523808 
邹洋 比勒(上海)自动化技术有限公司上海 201102 
张彦粉 东莞职业技术学院东莞 523808 
冯利军 西南技术工程研究所重庆 400039 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了优化UV白墨在烟包用镭射卡纸上的附着力,运用响应面实验设计方法对印刷工艺进行优化。方法 以在曼罗兰印刷机上生产红双喜烟标为例,以UV灯功率、印刷车速为自变量,以白墨在镭射卡纸上的附着力为因变量,利用Design Expert软件,设计响应面图表,对2个自变量进行多次拟合,建立相应的三维曲面,得到最优的数学模型,最后得到最优的印刷工艺,并加以实验验证。结果 当UV灯功率密度为120 W/cm,印刷机的印刷速度为8580张/h,能够使得白墨在镭射卡纸上有最优的附着力。结论 把响应面实验设计方法来优化烟包印刷工艺,在减少实验次数的同时,对白墨在镭射卡纸上的附着力具有较好的预测效果。
英文摘要:
      The work aims to improve the adhesion of white UV ink on laser paper with regard to cigarette package and optimize the printing process with the experimental design method for response surface. By taking Double Happiness cigarette label produced with Manroland printing machine as an example, and with the power of UV lamp and the speed of printing machine as the independent variables, and the adhesion of white ink on the laser paper as the dependent variable, the Design Expert software was used to design response surface chart. Multiplex fitting of the two independent variables was conducted to establish the corresponding 3D curve surface and obtain the optimal mathematical model, so as to finally obtain the optimal printing process and have such process verified through experiment. When the power of UV lamp was 120 w/cm, the speed of printing machine was 8,580 sheets/h, the optimal adhesion of white ink on laser paper could be obtained. The experimental design method for response surface used to optimize the printing process of cigarette packages can properly predict the adhesion of white ink on the laser paper at the time of reducing the number of experiments.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21244375位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号