文章摘要
李志强,晏立熊,梁佩,李俊.网箱托盘静动态力学性能的有限元分析[J].包装工程,2016,37(19):17-21.
LI Zhi-qiang,YAN Li-xiong,LIANG Pei,LI Jun.Finite Element Analysis of Static and Dynamic Mechanical Properties of Cage Pallet[J].Packaging Engineering,2016,37(19):17-21.
网箱托盘静动态力学性能的有限元分析
Finite Element Analysis of Static and Dynamic Mechanical Properties of Cage Pallet
投稿时间:2016-08-27  修订日期:2016-10-10
DOI:
中文关键词: 网箱托盘  结构静力分析  跌落分析
英文关键词: cage pallet  structural static analysis  drop analysis
基金项目:
作者单位
李志强 陕西科技大学西安 710021 
晏立熊 陕西科技大学西安 710021 
梁佩 陕西科技大学西安 710021 
李俊 陕西科技大学西安 710021 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 以新制仓储设备网箱托盘为研究对象,利用有限元分析软件对其受力进行分析。方法 通过SolidWorks软件对网箱托盘进行建模,并在Ansys Workbench中进行结构静力学分析,Ansys LS-DYNA中进行跌落分析,获得应力、应变、位移云图及相关数据。结果 结构静力学分析得到底托盘的最大应力为5.18 MPa,最大位移为1.2 mm;面跌落分析得到网箱最大应力为2 MPa,底托盘最大位移为16.51 mm。结论 网箱底托盘无支撑位置的变形较大,受损严重。该研究能够为网箱托盘的结构优化提供依据。
英文摘要:
      With the new warehouse equipment cage pallet as the research object, the work aims to study its state of force by finite element software. Model of the cage pallet was established by SolidWorks software, and structural statics was analyzed in Ansys Workbench and drop analysis was conducted in Ansys LS-DYNA. The related stress, strain, displacement and data were obtained. Analysis of structure static showed that the maximum stress of bottom pallet was 5.18 MPa, and the maximum displacement was 1.2 mm. Surface drop analysis showed that the biggest stress of cage was 2 MPa and the maximum displacement of the pallet at the bottom was 16.51 mm. In conclusion, the part of cage bottom tray where no support is applied is seriously deformed and damaged. This study provides a basis for the structural optimization of cage tray.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20791043位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号