文章摘要
李伟,王友权,董继先,马超.基于自调整内模控制法的复卷机张力控制的设计与仿真[J].包装工程,2016,37(11):149-152.
LI Wei,WANG You-quan,DONG ji-xian,MA Chao.Design and Simulation of Tension Control System of Winder Based on Self-tuning Internal Model Control Method[J].Packaging Engineering,2016,37(11):149-152.
基于自调整内模控制法的复卷机张力控制的设计与仿真
Design and Simulation of Tension Control System of Winder Based on Self-tuning Internal Model Control Method
投稿时间:2015-11-09  修订日期:2016-06-10
DOI:
中文关键词: 复卷机  磁粉离合器  卷绕张力  内模算法
英文关键词: winder  magnetic particle clutch  winding tension  internal model algorithm
基金项目:国家星火计划(2011GA740038, 2012GA740090)
作者单位
李伟 济宁职业技术学院济宁 272000 
王友权 济宁职业技术学院济宁 272000 
董继先 陕西科技大学西安 710021 
马超 特变电工山东鲁能泰山电缆有限公司泰安 271200 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 有效克服复卷机收线张力不稳定的问题,并有效抑制模型失配造成的误差。 方法 提出了基于内模控制算法优化的 PID 控制方法,将内模算法和传统 PID 控制方法相结合,用内模算法来调整PID 控制参数。 结论 仿真结果表明,该基于内模算法的 PID 控制方法具有优秀的控制品质,具有动态响应速度快、抗干扰能力强的优点。
英文摘要:
      Self-tuning internal model control can effectively overcome the problem that the take-up tension is not stable, and effectively restrain the error caused by model mismatch. PID control method based on internal model control algorithm was proposed, which combined the internal model control algorithm with the traditional PID control method, and the internal model algorithm was used to adjust the PID control parameters. The simulation results showed that the PID control method based on internal model algorithm has excellent control quality, with advantages such as fast dynamic response and strong anti-jamming capability.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20797375位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号