文章摘要
李芸,康勇刚,付志强,李军然,苗函阁.纸浆模制波状结构填充物的设计及缓冲性能[J].包装工程,2016,37(11):11-15.
LI Yun,KANG Yong-gang,FU Zhi-qiang,LI Jun-ran,MIAO Han-ge.Profiled Structure Design and Cushioning Performance of Molded Pulp[J].Packaging Engineering,2016,37(11):11-15.
纸浆模制波状结构填充物的设计及缓冲性能
Profiled Structure Design and Cushioning Performance of Molded Pulp
投稿时间:2015-11-10  修订日期:2016-06-10
DOI:
中文关键词: 纸浆模制品  波状结构  缓冲性能
英文关键词: molded pulp samples  profiled structure  cushioning performance
基金项目:
作者单位
李芸 天津科技大学天津 300222 
康勇刚 天津科技大学天津 300222 
付志强 天津科技大学天津 300222 
李军然 天津科技大学天津 300222 
苗函阁 天津科技大学天津 300222 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 对纸浆模制波状结构形式的缓冲填充物进行结构设计与缓冲包装性能的测试。 方法 设计并加工制备 2 种纸浆模制品波状缓冲结构填充物,其中 A 组试样的高度均为 30 mm,波状角度分别为 5°, 15°, 30°; B 组试样确定的波状角度均为 5°,高度变化分别为 10, 20, 30 mm。对 2 组试样分别进行了静态压缩、动态冲击和振动试验。结果 高为 30 mm,波状角度为 5°, 15°,30°的波状结构最大静载荷分别为 1230, 1430, 1600 N,波状角度为 5°,高为 20 和 30 mm 的波状结构最大静载荷分别为 560, 1380 N。 结论 静态压缩试验表明高度一定时,纸浆模制缓冲结构的波状角度越大,载荷能力越强, 波状角度一定时,高度越高,载荷能力越强;动态冲击试验表明纸浆模制缓冲结构的波状角度、高度影响着结构体的缓冲应用范围;振动试验表明在给定的载荷条件下试样避开了公路运输的共振频率。
英文摘要:
      This work aimed to design the structure of molded pulp with bi-wave cushioning and test the cushioning performance. Two different groups of the cushioning samples were designed, processed and prepared, group A with same the height of 30 mm and varying wave angles of 5°, 15° and 30°, respectively, while group B with the same wave angle of 5° and varying heights of 10, 20 and 30 mm, respectively. The performance was tested by static compression, dynamic impact and vibration tests. The maximum loads of group A samples with 30 mm height and 5°, 15° and 30°, were 1230, 1430 and 1600 N, respectively, while those of group B samples with 5° and 20, 30 mm height were 560 and 1380 N, respectively. The maximum loads became lager with increasing wave angle at constant height, and with increasing height at constant wave angle. The dynamic impact test showed that the height and wave angle impacted the cushioning application scope of the structure, and the result of vibration test proved that the profiled structure molded pulp could completely be used for highway transportation.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21129499位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号