文章摘要
杨仁民,张学昌,韩俊翔.铝箔卷装盒机封口机构动力学仿真及参数优化[J].包装工程,2016,37(7):85-91.
YANG Ren-min,ZHANG Xue-chang,HAN Jun-xiang.Dynamics Simulation and Structural Parameter Optimization of Sealing Mechanism of Aluminum Foil Cartoning Machine[J].Packaging Engineering,2016,37(7):85-91.
铝箔卷装盒机封口机构动力学仿真及参数优化
Dynamics Simulation and Structural Parameter Optimization of Sealing Mechanism of Aluminum Foil Cartoning Machine
投稿时间:2015-06-30  修订日期:2016-04-10
DOI:
中文关键词: 封口机构  动力学仿真  凸轮  弹簧刚度  预紧力
英文关键词: sealing mechanism  dynamics simulation  cam  spring stiffness  preload
基金项目:浙江省自然科学基金 (Y1100073); 宁波市产业技术创新及成果产业化重点项目 (2013B10022)
作者单位
杨仁民 1. 太原科技大学太原 0300242. 浙江大学宁波理工学院宁波 315100 
张学昌 浙江大学宁波理工学院宁波 315100 
韩俊翔 浙江大学宁波理工学院宁波 315100 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 解决铝箔卷装盒机封口机构在工作过程中出现抖动和凸轮回位弹簧经常断裂的问题。方法 建立封口机构的虚拟样机模型并进行动力学仿真, 通过封口机构的动力学特性分析封口机构中凸轮轮廓、 回位弹簧刚度、 装盒速度对整个封口机构工作性能的影响。结果 仿真结果表明, 封口机构的抖动出现在封口机构封口完毕之前, 正准备进入保持阶段的时候。回位弹簧刚度有助于减缓封口机构的抖动, 但若继续增加刚度, 减缓抖动的效果不明显。结论 当凸轮回位弹簧的刚度为0.4 N/mm, 封口速度为2 盒/s时, 封口机构的抖动最小, 整个过程中无明显的冲击现象, 整机性能得到提升。
英文摘要:
      In order to reduce the vibration of the sealing mechanism of aluminum foil cartooning machine during the working process and solve the problem of cam return spring fracture, the dynamic characteristic of the sealing mechanism was analyzed by using Adams. The influence of the cam profile and the return spring stiffness was also analyzed. Besides, the effect of cartooning speed was also taken into account. As the simulation result showed that the vibration often appeared before the end of sealing process when the remaining stage was about to start. Increasing the return spring stiffness was helpful for mitigating the vibration, but the effect was not obvious when the return spring stiffness continued to increase. The impact phenomenon was not obvious and the sealing mechanism had a good performance when the return spring stiffness was 0.4 N/mm and the cartooning speed was 2 pcs/s.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20789319位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号