文章摘要
宋钊.基于内聚力模型的纸板分层损伤分析[J].包装工程,2016,37(7):75-79.
SONG Zhao.Delamination Damage of Cardboard Based on Cohesion Model[J].Packaging Engineering,2016,37(7):75-79.
基于内聚力模型的纸板分层损伤分析
Delamination Damage of Cardboard Based on Cohesion Model
投稿时间:2015-07-09  修订日期:2016-04-10
DOI:
中文关键词: 纸板  内聚力模型  分层  有限元仿真
英文关键词: cardboard  cohesion model  lamination  finite element simulation
基金项目:
作者单位
宋钊 兰州交通大学兰州 730070 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 研究纸板在模压过程中的形变和分层现象。方法 模压是用纸板生产纸盒的重要环节, 模压过程容易造成纸板分层。用正交各向异性弹塑性连续体模型描述各层纸板的力学特性, 用内聚力模型描述纸板层间的粘合和在模压过程中的分层, 用有限元软件Abaqus模拟纸板模压, 再现纸板变形过程, 预测模压对纸板分层的影响。结果 从仿真结果得到, 模压造成纸板分层, 这与真实实验一致。结论 力学模型能描述纸板在模压过程中的形变和分层特性。
英文摘要:
      This experiment aimed to study the deformation and the delamination of cardboard during the creasing process. The creasing process was an important link during production of paper box by cardboard, however, this process was likely to cause paperboard delamination. An orthotropic elastoplastic continuum model was used to describe the mechanical property of each layer of cardboard. A cohesion model was used to describe the bonding and the delamination during creasing. The finite element software Abaqus was used to simulate creasing and the cardboard′s distortion and to forecast influence of creasing on paperboard delamination. According to the simulation results, the creasing process can cause paperboard delamination, which was consistent with the real test. The mechanical model can describe the deformation and the delamination of the cardboard.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20790482位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号