吴若梅,孙兆飞,连运增,章耀平,向红.饱和聚酯辊涂工艺参数对涂层性能的影响[J].包装工程,2016,37(3):36-39,49.
WU Ruo-mei,SUN Zhao-fei,LIAN Yun-zeng,ZHANG Yao-ping,XIANG Hong.Effect of Saturated Polyester Roller Coating Process Parameters on Coating Performance[J].Packaging Engineering,2016,37(3):36-39,49. |
| 饱和聚酯辊涂工艺参数对涂层性能的影响 |
| Effect of Saturated Polyester Roller Coating Process Parameters on Coating Performance |
| 投稿时间：2015-08-05 修订日期：2016-02-10 |
| DOI： |
| 中文关键词: 金属罐 饱和聚酯 辊涂工艺参数 |
| 英文关键词: metal cans saturated polyester roller coating process parameters |
| 基金项目:国家自然科学基金 （31171689）； 湖南省自然科学基金 （2015JJ6034） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 为了提高金属罐漆膜质量， 研究不同辊涂工艺参数对金属罐外涂膜性能的影响。方法 探讨在饱和聚酯辊涂过程中的涂料黏度， 取料辊与涂覆辊间距， 芯轴速度与滚筒速度 （周速比） 等工艺参数对涂层性能影响， 从而得出金属罐最佳辊涂工艺参数的设置范围。结果 涂料黏度， 取料辊与涂覆辊间距， 芯轴速度与滚筒速度（周速比）等工艺参数对金属罐漆膜的附着力、 硬度、 耐热性均有影响。结论 当涂料黏度为85 s（DIN6黏度杯）， 取料辊与涂覆辊间距为-4 μm， 芯轴速度与胶辊速度（周速比） 为2∶1时， 漆膜的综合性能最好。 |
| 英文摘要: |
| In order to improve the quality of metal cans film, the effect of different roller coating process parameters on the performance of external coating of metal cans was studied. The influences of roller coating process parameters on coating properties were discussed， including the viscosity of coatings, the spacing between feeding roller and coating roller, the spindle speed and roller speed (tip speed ratio), and the optimal ranges of roller coating process parameters were obtained. The experimental results showed that the process parameter of viscosity of coatings, feeding roller and coating roller spacing, spindle speed and roller speed (tip speed ratio) had influence on the film adhesion grade, hardness, heat resistance of the metal cans film. The good comprehensive performance film could be gain when the viscosity of coatings was 85 s, Feeding roller and coating roller spacing was -4 μm, spindle speed and roller speed (tip speed ratio) was 2∶1. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501716号