董伟,李克天,李啟定.自动装盒机推料机构设计与仿真[J].包装工程,2015,36(19):89-92.
DONG Wei,LI Ke-tian,LI Qi-ding.Designing and Simulation of Pusher Mechanism for Automatic Cartoning Machine[J].Packaging Engineering,2015,36(19):89-92. |
| 自动装盒机推料机构设计与仿真 |
| Designing and Simulation of Pusher Mechanism for Automatic Cartoning Machine |
| 投稿时间：2015-03-23 修订日期：2015-10-10 |
| DOI： |
| 中文关键词: 推料机构 曲柄连杆 仿真 模态分析 |
| 英文关键词: pusher mechanism crank rod simulation modal analysis |
| 基金项目:校企联合项目 （13HK0124） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 针对轻型物料装盒机， 设计串联式曲柄连杆推料机构。方法 分析推料机构各参数间的关系，确定参数尺寸范围， 运用SolidWorks建立三维模型和运动仿真， 求解得到推料滑块的线性速度、 加速度和位移曲线， 验证设计的合理性， 最后进行模态分析得到机构的固有频率。结果 经过仿真分析， 推料机构运动平稳， 具有明显的急回特性， 工作效率高。结论 该机构性能稳定， 经过投产使用证明达到设计要求。 |
| 英文摘要: |
| The aim of this work was to design a tandem crank rod pusher mechanism for cartoning machine of lightweight materials. The relationship among the different parameters of the pusher mechanism was analyzed and the size ranges of the parameters were determined. 3D mode and motion simulation were built based on SolidWorks, and the linear speed, acceleration and displacement curves of pusher slide were obtained by solving. The reasonability of the design was verified. Finally, modal analysis was conducted to get the natural frequency of the mechanism. Though simulation analysis, the pusher mechanism moved smoothly, with obvious quick-return characteristics and high efficiency. In conclusion, the mechanism had stable performance and met the design requirements as proved by putting into production. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501716号