文章摘要
彭 燕.凹印机PID算法实现[J].包装工程,2015,36(17):131-133,138.
PENG Yan.Implementation of Control Rule PID in Gravure Printing Machine[J].Packaging Engineering,2015,36(17):131-133,138.
凹印机PID算法实现
Implementation of Control Rule PID in Gravure Printing Machine
投稿时间:2014-12-22  修订日期:2015-09-10
DOI:
中文关键词: 凹版印刷机  张力控制  速度控制  数字PID控制  PID参数整定
英文关键词: gravure printing machine  tension controlling system  velocity control  digital multi-loop PID control  setting of PID parameter
基金项目:渭南师范学院学科建设重点项目 (14TSXK07)
作者单位
彭 燕 渭南师范学院渭南 714000 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 论述基于PLC工业控制器的多闭环回路的PID算法实现, 改进印刷机上的PID控制过程。方法 针对陕西北人机组式凹版印刷机的张力控制系统, 采用PLC编程实现速度和张力调节器的算法;在经典PID和数字PID算法基础上, 采用试凑法对PID控制器进行参数整定, 并在凹版印刷机上进行验证实验。结果 速度环实验表明: 在500 r/min的情况下, 电机很快达到设定值, 当外部扰动出现时, 大约经过6 s电机重新进入稳定状态; 张力环实验表明: 当卷径为92~800 mm时, 所整定的PID参数能够满足4个阶段收卷的不同任务要求, 正常运行时系统运行速度为100~200 m/min, 且系统出现外部干扰时能够很快调节摆辊位置, 使其恢复到垂直位置。结论 多级PID控制方式和参数整定能满足当前国产凹印机的收卷需求, 但当卷径不断变化超出800 mm时, 或者印刷速度大于200 m/min时, 整定好的PID参数会使系统性能变坏, 仍不能满足高效高速凹印机的生产任务要求, 需不断改进张力控制方案。
英文摘要:
      The aim of this study was to improve the PID control system of the printer based on the implementation of PID algorithm of the multi-loop circuit of the PLC industrial controller. A multi-loop control system for tension and velocity was introduced by PLC program based on the tension control system of gravure printing machine from Shaanxi Beiren Printing Co. Ltd., then the method of trial and error was adopted to adjust parameters of the PID controller in loops based on traditional PID and digital PID principles and the verification test of the algorithm was conducted on the gravure printer. The velocity loop test showed that the motor reached the set value in a rapid manner at 500 r/min and returned to stable status in about 6 s in external disturbance. The tension ring test showed that the set PID parameters can fulfill different task requirements of winding in 4 stages when the rolling diameter was 92~800 mm. The operation velocity was 100~200 m/min at normal conditions and the roller could be quickly adjusted to vertical position when external disturbance occurred. Multistage PID control and methods of parameter setting can satisfy requirements of domestic gravure machines. However, when the rolling diameter exceeds 800 mm or the linear velocity is greater than 200 m/min, PID controller would deteriorate the system performance, which fails to fulfill the production requirements of the high-efficient and high-speed gravure printer. Therefore, continuous improvement is needed for the tension control scheme.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20799612位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号