邱枫,杨臻,原永亮.一种新型电磁式锁紧机构设计与仿真分析[J].包装工程,2015,36(17):80-83.
QIU Feng,YANG Zhen,YUAN Yong-liang.Design and Simulation of a New Type of Electromagnetic Locking Mechanism[J].Packaging Engineering,2015,36(17):80-83. |
| 一种新型电磁式锁紧机构设计与仿真分析 |
| Design and Simulation of a New Type of Electromagnetic Locking Mechanism |
| 投稿时间：2014-09-03 修订日期：2015-09-10 |
| DOI： |
| 中文关键词: 锁紧机构 ADAMS 动态仿真 运动规律 |
| 英文关键词: docking mechanism ADAMS dynamic simulation motion law |
| 基金项目:山西省研究生优秀创新项目 （20143082） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 针对产品自动化包装， 设计一套新型电磁式锁紧机构， 对其性能进行仿真分析。方法 使用UG和ADAMS软件， 对锁紧机构进行三维建模设计和动力学仿真分析， 得到电磁式锁紧机构的运动规律和动力学曲线。结果 仿真结果表明： 速度每增大5 mm/s， 锁紧机构与吸附块的接触力增大15 N左右，吸附块的后退位移增大1.7 mm左右。合理控制锁紧机构的速度可以有效地提高系统的平稳性。结论通过仿真分析得到了系统的运动规律和动力学曲线， 验证了电磁式锁紧机构的可行性， ADAMS可以准确预测复杂机构的运动规律。 |
| 英文摘要: |
| The aims of this study were to design a new type of electromagnetic locking mechanism for automated packaging of the product, and to conduct simulation analysis on the performance of the electromagnetic locking mechanism. The establishment of the 3D model and dynamic simulation of the mechanism was carried out by using UG and ADAMS mechanical dynamics simulation software, the motion law and dynamic curves on electromagnetic locking mechanism were obtained at the same time. The simulation results showed that when the speed increased by 5 mm/s each time, the contact force between locking mechanism and the adsorption block body would increase by about 15 N, meanwhile, backward displacement on adsorption block would increase by approximately 1.7 mm. Through the analysis, reasonable control of the speed can effectively improve stability of the system. The result showed the motion law and dynamic curve of the system were obtained to verify its feasibility, indicating ADAMS can offer strong evidence on motion law and prediction feasibility of the complex system. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号