文章摘要
陆新宇,王利强,廉晓根.标签裹包折标机构设计[J].包装工程,2015,36(17):76-79,111.
LU Xin-yu,WANG Li-qiang,LIAN Xiao-gen.Design of Label Folding Wrap Mechanism[J].Packaging Engineering,2015,36(17):76-79,111.
标签裹包折标机构设计
Design of Label Folding Wrap Mechanism
投稿时间:2015-01-26  修订日期:2015-09-10
DOI:
中文关键词: 标签裹包  折标机构  参数分析
英文关键词: label wrapping  folding device  parameter analysis
基金项目:
作者单位
陆新宇 江南大学无锡 214122 
王利强 1. 江南大学无锡 2141222. 江苏省食品先进制造装备技术重点实验室无锡 214122 
廉晓根 江南大学无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 设计一套标签裹包折标机构。方法 基于机构设计理论与方法, 将解析法与AutoCAD辅助作图法相结合, 对裹包折标执行机构进行参数设计; 利用SolidWorks软件的建模工具, 对裹包折标机构进行局部结构建模设计。结果 针对矩形纸板标签及特定裹包要求, 设计提出了标签裹包折标的系统机构原理, 以最小传动角理论对关键折标机构完成了参数化设计, 并设计了结构模型, 理论上验证了设计的标签裹包折标机构的可行性。结论 设计的标签裹包折标机构适用于刚性或柔性物体包装, 为标签裹包系统设计及技术应用提供了理论参考。
英文摘要:
      The aim of this study was to design a mechanism of label folding wrap. The parameters of the major execution module were designed based on the theory and the methods of the four-bar linkage design in combination with the AutoCAD assisted mapping. The structural model for the label folding wrapping mechanism was carried out using modeling module which was based on the software of SolidWorks. Aiming at rectangular paper label and specific requirement of wrapping, the design put forward the principle of label folding wrapping system. The parametric design of the key mechanism of label folding wrap was completed according to the minimum transmission angle theory. The structural model was accomplished to verify the feasibility of the mechanism. The mechanism of label folding wrap could be used to pack both rigid and flexible objects. This study provides a reliable theoretical guarantee for applying the label folding wrapping mechanism to the manufacturing.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20786452位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号