文章摘要
杨铁,张云鹤,马岩,任洪娥,丛亮,杨春梅.基于PLC的封边机板材进给系统控制研究[J].包装工程,2015,36(15):119-123.
YANG Tie,ZHANG Yun-he,MA Yan,REN Hong-e,CONG Liang,YANG Chun-mei.Control of Slab Feeding System in Edge Banding Machine Based on PLC[J].Packaging Engineering,2015,36(15):119-123.
基于PLC的封边机板材进给系统控制研究
Control of Slab Feeding System in Edge Banding Machine Based on PLC
投稿时间:2014-07-10  修订日期:2015-08-10
DOI:
中文关键词: PLC  封边机  进给系统
英文关键词: PLC  edge banding machine  feeding system
基金项目:国家林业局引进948项目 (2014-4-77)
作者单位
杨铁 东北林业大学哈尔滨 150040 
张云鹤 东北林业大学哈尔滨 150040 
马岩 东北林业大学哈尔滨 150040 
任洪娥 东北林业大学哈尔滨 150040 
丛亮 东北林业大学哈尔滨 150040 
杨春梅 东北林业大学哈尔滨 150040 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 基于PLC控制系统对电动机进行正反转控制, 提高封边机板材进给系统动作调整的自动化程度。方法 在对封边机板材进给系统动作要求进行分析的基础上, 基于PLC控制系统, 对封边机板材进给系统中电动机正反转及整体控制进行程序设计, 以实现进给系统中电动机的动作顺序控制。结果 利用PLC控制封边机板材进给系中电动机的动作顺序, 实现了进送料、 宽度调整、 输送和机架与升降台等机构的动作调整, 封边机板材进给系统的工作过程能自动控制。结论 该封边机板材进给系统运行稳定可靠, 保证了板材运动的稳定性和控制的可靠性, 提高了生产效率。
英文摘要:
      This study aimed to improve the automation-degree of action adjustment of slab feeding system in edge banding machine, and to ensure the efficient and real-time of the system operation. Through a study of action required of slab feeding system in edge banding machine and the programming of PLC control system, the operation sequence control of motors in feeding system was achieve. An automatically control was achieved during the work processes of slab feeding system in edge banding machine, which improved the production efficiency. The controlling of feeding system based on PLC has stable and reliable operation, high degree of automation, and certain economic value.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20793943位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号