姚尚金,蔡锦达.基于相位法的色标传感器动态响应特性测试与分析[J].包装工程,2015,36(13):101-103.
YAO Shang-jin,CAI Jin-da.Testing and Analysis of Dynamic Response Characteristics of Color Sensors Based on Phase Method[J].Packaging Engineering,2015,36(13):101-103. |
| 基于相位法的色标传感器动态响应特性测试与分析 |
| Testing and Analysis of Dynamic Response Characteristics of Color Sensors Based on Phase Method |
| 投稿时间：2014-10-31 修订日期：2015-07-10 |
| DOI： |
| 中文关键词: 色标传感器 动态响应时间 相位法 触摸屏 |
| 英文关键词: color sensor dynamic response characteristics phase method touch screen |
| 基金项目:上海市研究生创新基金 （JWCXSL1402） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 研究色标传感器的动态响应特性。方法 采用相位法测试色标传感器的动态响应特性；以嵌入式工业触摸屏为控制核心， 与色标传感器、 富士伺服电机、 伺服驱动器和编码器组成测试装置， 间接测试动态响应时间； 用MATLAB软件处理实验数据， 分析其动态特性。结果 在动态响应时间内， 根据基于触摸屏的相位法， 测得动态响应时间为2 ms， 其系统为一阶系统。结论 该测试方法简单可靠， 可以测出各种传感器的动态响应时间， 并可以判断其系统特性。 |
| 英文摘要: |
| This paper studied the dynamic response characteristics of color sensor. The phase method was used to test and analyze the dynamic response characteristics of color sensor. A testing device was set with the embedded industrial touch screen as the controlling core in combination with the color sensor, the Fuji servo motor, the servo drive and the encoder to indirectly test the dynamic response time. The MATLAB software was used to process experimental data to analyze its dynamic characteristics. The dynamic response time was measured to be 2 ms according to the phase method based on touch screen in the dynamic response time, and its system was a first order system. The measurement method was simple and reliable, and the dynamic response time can be measured in a variety of sensors and can determine the system characteristics. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号