张洪军,尚润琪.基于Pro/E行为建模技术的包装机械零部件优化[J].包装工程,2015,36(9):95-98. ZHANG Hong-jun,SHANG Run-qi.Optimization of Packaging Machinery Spare Parts Based on the Pro/E Behavior Modeling Technology[J].Packaging Engineering,2015,36(9):95-98. |
基于Pro/E行为建模技术的包装机械零部件优化 |
Optimization of Packaging Machinery Spare Parts Based on the Pro/E Behavior Modeling Technology |
投稿时间:2014-10-22 修订日期:2015-05-10 |
DOI: |
中文关键词: 行为建模 包装机械 优化设计 |
英文关键词: behavior modeling packing machinery optimization design |
基金项目: |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 将 Pro/E 行为建模技术应用在包装机械零部件优化设计中, 以期得到最优的设计参数。方法 简要给出Pro/E行为建模的一般过程, 在对插板驱动机构模型建立测量特征、 插入运动分析特征及关系分析特征, 并进行灵敏度分析。在可行性/优化分析的基础上, 优化插板驱动机构中的凸轮大径、 小径、 凸轮位置及曲柄孔间距离。结果 得到了满足设计意图的插板驱动机构模型参数尺寸,圆整后得凸轮大径 R 为 34 mm, 凸轮小径 r 为 30 mm, 凸轮位置高度 H 为 40 mm, 曲柄孔间距离 L 为91 mm。结论 在包装机械零部件优化设计中应用Pro/E行为建模技术, 可以大大提升包装机械的设计效率与质量。 |
英文摘要: |
This paper applied the Pro/E behavioral modeling technology in the optimization design of packaging machinery spare parts, in order to get the optimal design parameters. The general process of Pro/E behavior modeling was briefly given, measurement features of plug-in boards drive mechanism model were established namely, movement analysis characteristics and relationships analysis features, were inserted for sensitivity analysis. On the basis of feasibility/ optimization analysis, the large diameter and small diameter of the cam, cam position and the distance between the holes of the crank in the plug-in boards drive mechanism were optimized. As a result, the parameter sizes of the plug-in boards drive mechanism model which satisfied the design intent were obtained, after rounding, the cam large diameter R was 34 mm, the cam small diameter r was 30 mm, the height of cam H was 40 mm, and the distance between the crank hole L was 91 mm. In conclusion, application of Pro/E behavioral modeling technology in the optimization design of packaging machinery spare parts could greatly improve the design efficiency and quality of packaging machinery. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|