朱鹏飞,黄松和,冷东.组合秤下料机构自适应控制[J].包装工程,2015,36(9):90-94.
ZHU Peng-fei,HUANG Song-he,LENG Dong.Self-adaptive Control System for Feeding Mechanism of the Combination Weigher[J].Packaging Engineering,2015,36(9):90-94. |
| 组合秤下料机构自适应控制 |
| Self-adaptive Control System for Feeding Mechanism of the Combination Weigher |
| 投稿时间：2014-11-11 修订日期：2015-05-10 |
| DOI： |
| 中文关键词: 组合秤 下料机构 参数 自适应控制 |
| 英文关键词: combination weigher feeding mechanism parameters self-adaptive control |
| 基金项目:四川省科技支撑计划项目 （2014GZ0024） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 研究组合秤下料机构参数缓慢时变导致的下料量偏差大的自适应控制方法。方法 采用模型参考自适应控制对下料速度的偏差进行补偿， 给出模型参考自适应控制器的设计方法， 并采用Matlab软件进行仿真。结果 当模拟下料机构在1 s之后发生机构参数变化时， 在2 s内无自适应控制系统下料量与参考模型下料量的偏差随时间增加而比例增大， 在2 s时相对误差达41.38%； 采用自适应控制系统， 其下料量偏差稳定， 在2 s时相对误差为3.36%。结论 组合秤下料机构采用自适应控制系统， 能够有效减少由于参数缓慢时变引起的下料量偏差。 |
| 英文摘要: |
| The aim of this work was to study the self-adaptive control system which could reduce the large deviations of the combination weigher’ s feeding amount that was caused by the slow change of feeding mechanism’ s parameters. This paper allowed the model reference adaptive control (MRAC) system to compensate for the deviations of the feeding speed, proposed the design method of the MRAC system for feeding mechanism, and performed simulation with the Matlab software. Assuming that the parameters of feeding mechanism changed at 1s, without the MRAC system, the deviations of feeding amount increased with the time within 2 s, and the relative error reached the maximum value of 41.38 % at 2 s. With the MRAC system, the deviations of feeding amount kept stable, and the relative error was 3.36 % at 2 s. When the MRAC system was adopted for the feeding mechanism of combination weigher, the feeding amount deviations caused by the slow change of the mechanism′ s parameters could be effectively reduced. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号