文章摘要
付艳艳,成立.柱透镜光栅立体印刷研究[J].包装工程,2015,36(3):123-128.
FU Yan-yan,CHENG Li.Cylindrical Lens Grating Three-dimensional Printing[J].Packaging Engineering,2015,36(3):123-128.
柱透镜光栅立体印刷研究
Cylindrical Lens Grating Three-dimensional Printing
投稿时间:2014-06-26  修订日期:2015-02-10
DOI:
中文关键词: 柱透镜光栅立体印刷  光栅测试  图像处理
英文关键词: cylindrical lens grating three-dimensional printing  grating test  image processing
基金项目:湖北省本科高校印刷工程专业综合改革试点项目(鄂教高[2013]10 号);湖北省教育厅高等学校省级教研项目(2011384)
作者单位
付艳艳 1. 荆楚理工学院荆门 4480002. 华南理工大学广州 510640 
成立 华南理工大学广州 510640 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 采用光栅立体成像原理, 研究由专业图像处理软件制作基于柱透镜光栅的立体影像图的技术方法。方法 将立体印刷图像原稿, 在Photoshop CS 5图像处理软件中按前后景顺序分层放置, 并导入3D MAGIC V2专业立体软件中, 进行一系列处理制作成光栅图像; 将柱透镜光栅与光栅图像精确对位并紧密压裱, 形成光栅立体影像图。结果 经过专业计算机软件处理, 获得了具有良好立体视觉效果的影像图。结论 利用专业图像处理软件, 进行柱透镜光栅立体图的制作是简单可行的方法, 所得到的立体图效果强烈、 观赏性强、 应用前景广阔。
英文摘要:
      To study the technical method of three-dimensional imaging based on column lens grating produced by professional image processing software using the principle of grating stereo imaging. The stereoscopic printing images in manuscript were placed in layers in the foreground order using the Photoshop CS 5 image processing software, then imported into the 3D MAGIC V2 professional 3D software to create raster images through a series of processing, in the end, the cylindrical lens grating and raster images were precisely aligned and piped, and grating stereo images were formed. An image with a good stereoscopic vision effect was obtained after the treatment of professional computer software. Making cylindrical lens grating three-dimensional map using the professional image processing software was a simple and practical method. The resulting stereogram effect was strong, entertaining and had a broad application prospect.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20817274位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号