文章摘要
康柳,刘婧,张佳娟,母军.基于SolidWorks的卡扣快装箱有限元分析[J].包装工程,2015,36(3):65-69,89.
KANG Liu,LIU Jing,ZHANG Jia-juan,MU Jun.Finite Element Analysis of Quickly Assembled Box with Buckles via SolidWorks[J].Packaging Engineering,2015,36(3):65-69,89.
基于SolidWorks的卡扣快装箱有限元分析
Finite Element Analysis of Quickly Assembled Box with Buckles via SolidWorks
投稿时间:2014-06-06  修订日期:2015-02-10
DOI:
中文关键词: 木质快装箱  SolidWorks仿真  卡扣
英文关键词: quickly assembled wooden box  SolidWorks simulation  buckle
基金项目:北京林业大学大学生创新创业实践项目 (X1310022041)
作者单位
康柳 北京林业大学北京 100083 
刘婧 北京林业大学北京 100083 
张佳娟 北京林业大学北京 100083 
母军 北京林业大学北京 100083 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 木制包装以其轻质高强的特性被广泛应用于大中型机电产品的外包装, 且其材料符合绿色可持续包装的特点, 为了避免在性能测试过程中浪费材料, 采用有限元分析对其受力状态进行模拟。方法 通过SolidWorks软件对1500 mm×800 mm×733 mm卡扣包装箱进行建模, 在Simulation插件中进行静态力测试、 跌落测试, 并获得应力云图、 应变云图、 位移云图及相关数据。结果 在对卡扣快装箱进行有限元分析后, 得到了箱体应力、 应变、 位移云图及最大应力、 应变发生点的坐标。结论 卡扣箱的底板、 托盘一体化可以降低卡扣箱底板产生的应力, 在静态力作用下的最大应力发生点与跌落过程中的最大应力发生点位置不同。
英文摘要:
      Wooden boxes are widely used in the exterior packages of large and medium-sized mechanical and electrical products, and the material has the characteristic of green and sustainable packages. To reduce the waste of specimen materials in performance test, the authors used finite element method to simulate the force analysis of the box. This paper used SolidWorks to model a container with the size of 1500 mm × 800 mm × 733 mm, and carried out the simulation tests using the Simulation plug-in. The static force and drop tests were conducted to obtain stress, displacement and strain contours as well as the relevant data. After finite element analysis of the quickly assembled box with buckles, the authors obtained the contours of stress, strain and displacement, and the coordinates of maximum stress and strain. The integration of box′ s baseboard and pallet decreased the stress on the bottom board of the box with buckles, and for the box subjected on the static force, the occurring point of maximum stress was different from that of the dropping box.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20803549位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号