文章摘要
宋小辉,孙伟,刘凤,牛明军,陈金周.利用废旧PET生产扁丝的设备设计[J].包装工程,2015,36(1):85-88.
SONG Xiao-hui,SUN Wei,LIU Feng,NIU Ming-jun,CHEN Jin-zhou.Design of Equipment for Flat Film Tape Production Using Waste PET[J].Packaging Engineering,2015,36(1):85-88.
利用废旧PET生产扁丝的设备设计
Design of Equipment for Flat Film Tape Production Using Waste PET
投稿时间:2014-11-01  修订日期:2015-01-10
DOI:
中文关键词: 废旧PET  PET扁丝  专用设备  结构设计
英文关键词: waste PET  PET flat film tape  special equipment  structure design
基金项目:
作者单位
宋小辉 郑州大学郑州 450001 
孙伟 郑州大学郑州 450001 
刘凤 郑州大学郑州 450001 
牛明军 郑州大学郑州 450001 
陈金周 郑州大学郑州 450001 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 设计利用废旧PET生产扁丝的专用设备, 以解决PET扁丝生产过程中断丝情况严重, 无法正常连续生产的难题。方法 通过分析扁丝生产的工艺过程, 合理划分生产线工位, 并对其设备进行机械结构设计, 验证其合理性。结果 制得的PET扁丝有较好的韧性、 拉伸性能, 断裂强度达50 MPa以上, 可应用于生产高性能的编织袋和集装袋。结论 其专用设备组成的生产线可实现PET扁丝的连续化生产。废旧PET的利用既降低了生产成本, 提高了经济效益, 又充分利用了资源, 同时也有利于环境保护。
英文摘要:
      To solve the problem of severe breakage during production of PET flat film tape and interruption of normal continuous production, a special equipment was design for production of flat film tape using waste PET. Through analysis of the production process of flat film tape, stations were divided reasonably, the mechanical structure of the equipment was designed, and the rationality was confirmed. The flat film tapes with high toughness and excellent stretch properties were obtained, with a breaking strength of up to 50 MPa, which could be used for production of high-performance woven sacks and bags. The production line consisted by this type of special equipment could realize continuous production of PET flat film tape. The utilization of waste PET reduced the production cost and enhanced the economic efficiency, and meanwhile saved the natural resources. Moreover, it would be beneficial for environmental protection.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21148214位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号