文章摘要
张贺傢,王赞,张新昌.双层纸浆模塑制品成型工艺影响因素的研究[J].包装工程,2015,36(1):80-84.
ZHANG He-jia,WANG Zan,ZHANG Xin-chang.Factors Influencing the Forming Process of Two-ply Molded Pulp Products[J].Packaging Engineering,2015,36(1):80-84.
双层纸浆模塑制品成型工艺影响因素的研究
Factors Influencing the Forming Process of Two-ply Molded Pulp Products
投稿时间:2014-10-21  修订日期:2015-01-10
DOI:
中文关键词: 双层纸浆模塑  色差  湿坯含水率  打浆度  浆料配比
英文关键词: two-ply molded pulp  chromatic aberration  moisture content  beating degree  slurry ratio
基金项目:
作者单位
张贺傢 江南大学无锡 214122 
王赞 江南大学无锡 214122 
张新昌 江南大学无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为了改善纸浆模塑的表观性能, 提高纸模制品的附加值。方法 研究一种双层纸浆模塑制品的成型工艺过程, 并通过正交试验研究双层纸浆模塑制品成型工艺的影响因素。结果 正交试验表明, 纸浆模塑制品的湿坯含水率和特种浆料的打浆度都能引起制品色差的变化, 最佳条件下的色差ΔE=0.41。结论 通过正交试验分别确定了 3 个条件因素对色差影响的主次顺序, 分别为湿坯含水率、 打浆度和浆料配比, 并通过极差分析确定了最佳条件因素, 湿坯含水率为15%, 特种浆料打浆度为20 °SR, 外层特种浆与内层普通浆的质量配比为0.45。
英文摘要:
      To improve the surface performance and the additional value of molded pulp. his paper studied the forming process of a two-ply molded pulp product, and investigated the influencing factors of the forming process of the two-ply molded pulp product through orthogonal experimental design. The tests showed that both the moisture content of wet blank molded pulp and the beating degree of special pulp slurry caused changes in chromatic aberration of samples. The chromatic aberration was ΔE=0.41 under the optimal conditions. As revealed by orthogonal experiments, the influences of the three factors on colour difference followed the order of the moisture content of wet blank molded pulp, the beating degree and the fiber composition. And range analysis showed that the optimal experiment condition for reaching the least chromatic aberration was: a moisture content of wet blank molded pulp of 15%, a beating degree of 20 °SR and a mass ratio between outer special slurry and inner common slurry of 0.45.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20802874位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号