文章摘要
贾俊伟,钱军浩,张晓丹.全息防伪烟包的镀铝工艺研究[J].包装工程,2014,35(21):71-75.
JIA Jun-wei,QIAN Jun-hao,ZHANG Xiao-dan.Aluminium Coating Process for Holographic Anti-counterfeiting Cigarette Packet[J].Packaging Engineering,2014,35(21):71-75.
全息防伪烟包的镀铝工艺研究
Aluminium Coating Process for Holographic Anti-counterfeiting Cigarette Packet
投稿时间:2014-06-25  修订日期:2014-11-10
DOI:
中文关键词: 真空镀铝  全息  防伪  包装材料
英文关键词: vacuum aluminizing process  holographic  anti-counterfeiting  packaging materials
基金项目:
作者单位
贾俊伟 江南大学无锡 214122 
钱军浩 江南大学无锡 214122 
张晓丹 江南大学无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 为解决苏州某公司在红塔山(经典100)烟包打样过程中样品与标准样张的色差问题, 调整烟包生产中的镀铝工艺参数, 确定最佳生产方案。方法 通过采集不同机台的打样数据找出铝层厚度与对应方阻值的关系, 分析实验数据、 绘制曲线并得到 Rs-d的拟合方程。结果 方阻值随铝层厚度增加而减小, 且在不同的铝层厚度区间内方阻减小的速率不同, 分界点为(2.61, 2.54)。结论将镀铝工艺的方阻值控制在2.21~2.72 Ω范围内, 能有效解决打样的色差问题。
英文摘要:
      Objective To solve the color difference problem between the cigarette packet samples and the proofs of Hongtashan ( Classic 100 ) of a company in Suzhou, the process parameters in the aluminum coating process were adjusted, and the optimal production program was determined. Methods Data was collected from different proofing machines to find out the relationship between the aluminum layer thickness with the corresponding square resistance, and a fitting equation of Rs-d was obtained by analyzing the experimental data and drawing curves. Results The square resistance decreased with the increasing aluminum layer thickness, and the decreasing speed was different within different intervals of aluminum layer thickness, with a demarcation point of (2.61, 2.54). Conclusion Controlling the square resistance of the aluminum layer within 2.21~2.72 Ω could effectively solve the color difference in the proofing process.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20801438位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号