文章摘要
徐兵,徐培炘.复合机铝箔换卷中的速度损失研究[J].包装工程,2014,35(21):59-63.
XU Bing,XU Pei-xin.Speed Loss during Reel Change of Aluminum Foil in Compound Device[J].Packaging Engineering,2014,35(21):59-63.
复合机铝箔换卷中的速度损失研究
Speed Loss during Reel Change of Aluminum Foil in Compound Device
投稿时间:2014-03-01  修订日期:2014-11-10
DOI:
中文关键词: 复合机  铝箔换卷  速度损失  综合效率
英文关键词: compound device  reel change of aluminum foil  speed loss  OEE
基金项目:
作者单位
徐兵 苏州信息职业技术学院苏州 215200 
徐培炘 苏州工业园区职业技术学院苏州 215123 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 减少铝箔复合机换卷时的速度降幅及变化, 改善降速换卷中容易断幅的问题, 从而提高设备的综合效率 (OEE)。方法 通过对实验数据的5W1H和张力分析, 建立复合机铝箔换卷时铝箔张力的动力模型, 探讨了张紧辊张力、 压辊压力、 铝箔偏心度、 运动离心力方向角和速度差等影响铝箔张力的因素, 并对实际操进行了实验改进。结果 铝箔在换卷时速度变化得到改善, 改善了断幅的问题。结论 调整影响铝箔张力等一系列因素, 综合效率 (OEE) 达到92.1%, 提高了生产效率。
英文摘要:
      Objective To reduce the speed deceleration and change during reel change of aluminum foil compound device, and solve the problem of broken pieces of aluminum foil during reel change, so as to improve the overall equipment efficiency (OEE). Methods Based on the analysis of the experimental data by the methods of 5W1H and tension analysis, a dynamic model was established on the foil tension during reel change of the aluminum foil compound device. The research explored many factors that affected the foil tension such as roller tension and pressure, foil eccentricity, direction angel of centrifugal movement, speed difference and so on. The practical operation was experimentally improved. Results The speed variation during the reel change of the aluminum foil was improved and the problem of broken pieces was solved. Conclusion Through the adjustment of many factors that affected the foil tension, the OEE reached 92.1% and the production efficiency was improved.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20798217位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号