文章摘要
孙银方,周长江,张红涛.基于梯度优化算法的面巾纸包装机抓纸系统弹簧设计[J].包装工程,2014,35(21):46-49,103.
SUN Yin-fang,ZHOU Chang-jiang,ZHANG Hong-tao.Design of the Spring in the Paper-clamping System of the Towel Packaging Machine Based on Gradient Optimization Algorithm[J].Packaging Engineering,2014,35(21):46-49,103.
基于梯度优化算法的面巾纸包装机抓纸系统弹簧设计
Design of the Spring in the Paper-clamping System of the Towel Packaging Machine Based on Gradient Optimization Algorithm
投稿时间:2014-07-28  修订日期:2014-11-10
DOI:
中文关键词: 面巾纸包装机  抓纸系统  弹簧  梯度优化算法
英文关键词: towel packaging machine  paper-clamping system  spring  gradient optimization algorithm
基金项目:国家自然科学基金 (51275160)
作者单位
孙银方 湖南大学 国家高效磨削工程技术研究中心长沙 410082 
周长江 湖南大学 国家高效磨削工程技术研究中心长沙 410082 
张红涛 湖南大学 国家高效磨削工程技术研究中心长沙 410082 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 解决弹簧力矩偏小导致抓纸困难的问题。方法 在满足使用要求的前提下, 基于梯度优化算法以弹簧质量最小为优化目标, 对面巾纸包装机抓纸系统的弹簧丝直径、 中径和工作圈数进行改进设计。通过对抓纸系统进行受力分析, 得到活动板重力矩和优化前后的弹簧力矩。结果 优化后的弹簧丝直径、 中径和工作圈数分别增加了13.78%, 23.37%和25.28%; 优化后的弹簧力矩显著增加, 在活动板向上旋转10°后, 弹簧力矩开始大于活动板重力矩。结论 优化后的弹簧满足使用要求, 能够保证抓纸动作较为准确地完成。
英文摘要:
      Objective To solve the paper clamping difficulty caused by the low spring torque. Methods In the premise of meeting the using requirements, the parameters of spring in the paper-clamping system of the towel packaging machine, including spring wire diameter, middle diameter and the number of spring effective coils, were optimized by gradient optimal algorithm. Through stress analysis of the paper-clamping system, the gravitational torque of the portable plate and the spring torque before and after optimization were obtained. Results After optimization, the spring wire diameter, the middle diameter and the number of spring effective coils were increased by 13.78%, 23.37% and 25.28%, respectively. The optimized spring torque increased significantly. When the portable plate rotated 10 degrees upwards, the optimized spring torque was higher than the gravitational torque of the portable plate. Conclusion The optimized helical spring met the requirements of paper clamping and could ensure the accurate completion of paper clamping.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20818079位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号